Re: blustore osd nearfull but no pgs on it

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I was thinking the same thing.  Very small OSDs can behave unexpectedly because of the relatively high percentage of overhead.   

> On Nov 18, 2023, at 3:08 AM, Eugen Block <eblock@xxxxxx> wrote:
> 
> Do you have a large block.db size defined in the ceph.conf (or config store)?
> 
> Zitat von Debian <debian@xxxxxxxxxx>:
> 
>> thx for your reply, it shows nothing,... there are no pgs on the osd,...
>> 
>> best regards
>> 
>>> On 17.11.23 23:09, Eugen Block wrote:
>>> After you create the OSD, run ‚ceph pg ls-by-osd {OSD}‘, it should show you which PGs are created there and then you’ll know which pool they belong to, then check again the crush rule for that pool. You can paste the outputs here.
>>> 
>>> Zitat von Debian <debian@xxxxxxxxxx>:
>>> 
>>>> Hi,
>>>> 
>>>> after a massive rebalance(tunables) my small SSD-OSDs are getting full, i changed my crush rules so there are actual no pgs/pools on it, but the disks stay full:
>>>> 
>>>> ceph version 14.2.21 (5ef401921d7a88aea18ec7558f7f9374ebd8f5a6) nautilus (stable)
>>>> 
>>>> ID     CLASS WEIGHT     REWEIGHT SIZE    RAW USE DATA    OMAP META     AVAIL    %USE  VAR  PGS STATUS TYPE NAME
>>>> 158   ssd    0.21999  1.00000 224 GiB 194 GiB 193 GiB  22 MiB 1002 MiB   30 GiB 86.68 1.49   0     up             osd.158
>>>> 
>>>> inferring bluefs devices from bluestore path
>>>> 1 : device size 0x37e4400000 : own 0x[1ad3f00000~23c600000] = 0x23c600000 : using 0x39630000(918 MiB) : bluestore has 0x46e2d0000(18 GiB) available
>>>> 
>>>> when i recreate the osd the osd gets full again
>>>> 
>>>> any suggestion?
>>>> 
>>>> thx & best regards
>>>> _______________________________________________
>>>> ceph-users mailing list -- ceph-users@xxxxxxx
>>>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>>> 
>>> 
>>> _______________________________________________
>>> ceph-users mailing list -- ceph-users@xxxxxxx
>>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
>> _______________________________________________
>> ceph-users mailing list -- ceph-users@xxxxxxx
>> To unsubscribe send an email to ceph-users-leave@xxxxxxx
> 
> 
> _______________________________________________
> ceph-users mailing list -- ceph-users@xxxxxxx
> To unsubscribe send an email to ceph-users-leave@xxxxxxx
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx




[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux