What is the namespace you are using? Ceph or my_ceph, also stop using the latest tag, that will force to always go and check the repository even if you have the image in your local node, no tag will always default to latest. If podman pull and cephadm commands are behaving differently while pulling the exact same image, it will be a good idea to debug default parameters on those two. The inspection showed also quay urls, is the internal registry configured to fallback to quay? Another thing is that you mentioned the command worked fine only in the admin node, and you're pulling images from the admin node, right? So adminnode is also the registry? What are you using as internal registry? What is the registry configuration? Are you sure that pulling the image from admin node that I think is the same node as the registry is pulling the image local and not going out to quay? Cheers. --- Alvaro Soto. Note: My work hours may not be your work hours. Please do not feel the need to respond during a time that is not convenient for you. ---------------------------------------------------------- Great people talk about ideas, ordinary people talk about things, small people talk... about other people. On Sun, Jul 31, 2022, 3:37 AM Hossein Dehghanpoor < hossein.dehghanpoor@xxxxxxxxx> wrote: > sure it is :D > I am sure there is something wrong with the local registry. something > related to manifest. > any help would be appreciated, > > On Sun, Jul 31, 2022 at 1:00 PM Marc <Marc@xxxxxxxxxxxxxxxxx> wrote: > > > > > Is it not easier to start with installing from rpm's? > > > > > > > > > > Hi guys > > > i am going to deploy local image repository using this guide: > > > > > > https://docs.ceph.com/en/latest/cephadm/install/#deployment-in-an- > > > isolated-environment > > > > > > so i did everything to make my repository available to all cluster > > > nodes. > > > so each node would be able to pull the image (that i already pushed to > > > my > > > local repository) by tag. > > > > > > but there is a problem when i try to create my own cluster using this > > > command: > > > > > > cephadm --image adminnode:5000/ceph:latest --mon-ip 10.0.40.10 > > > > > > this command will be executed successfully on the admin node, but when > i > > > try to add other hosts to the cluster there is no success for them to > > > pull > > > the image. after a bit digging i figured out that other nodes try to > use > > > the image digest to pull from the localrepository. after that I did > > > check > > > and I could not download the images from my local repository using the > > > digest. > > > > > > how can I solve this issue? > > > > > > thank you in advance. <3 > > > _______________________________________________ > > > ceph-users mailing list -- ceph-users@xxxxxxx > > > To unsubscribe send an email to ceph-users-leave@xxxxxxx > > > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |