Had to delete my filesystem and pools and recreate them. Then it worked. Not sure what happened. Thanks everyone! -- Salsa Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Wednesday, September 4, 2019 4:19 PM, Salsa <salsa@xxxxxxxxxxxxxx> wrote: > Sorry, but it took me a while to be able to get back to this. > > So I learned that my Samba installation was faulty and there was no way I managedto fix it, so uninstalled Samba and started it over using anothr cluster server. > > Installed Samba 4.8.3 using yum and compiled samba-4.8.3 to get vfs_ceph module following instructions from here: > > https://blog.51cto.com/evely/2432206?source=dra > > I have it set up and working and I followed you advice and shared a local directory to check if Samba was working. > > I can mount this directory from another machine but my Ceph share fails with this: > > " > [2019/09/04 15:50:37.480465, 1] ../source3/smbd/service.c:655(make_connection_snum) > make_connection_snum: SMB_VFS_CONNECT for service 'cephfs' at '/' failed: Connection timed out > " > > My ceph section is as follows: > [cephfs] > create mask = 0777 > directory mask = 0777 > guest ok = Yes > guest only = Yes > kernel share modes = No > oplocks = No > path = / > read only = No > vfs objects = ceph > ceph: user_id = samba.gw > ceph:config_file = /etc/ceph/ceph.conf > > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > > Salsa > > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, August 29, 2019 1:37 PM, David Disseldorp ddiss@xxxxxxx wrote: > > > Hi Salsa, > > The vfs_ceph "ceph: user_id" parameter specifies the CephX user ID > > which Samba (via libcephfs) uses to authenticate with the Ceph > > cluster. These credentials are completely separate to the SMB user > > credentials which you provide with smbclient, etc. It seems that you > > might be confusing them in your setup. > > As documented in the Samba vfs_ceph manpage, "kernel share modes = no" > > must currently be configured for CephFS shares. > > Also, the "cephfs" share name in your smb.conf doesn't match the > > "cephfs_a" name you're giving to smbclient. > > I'd suggest configuring a locally backed Samba share first and get that > > working with your Windows clients before moving over to the CephFS > > backed share. > > Cheers, David _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |