Am 10.01.2018 um 16:38 schrieb Sage Weil: > On Wed, 10 Jan 2018, John Spray wrote: >> On Wed, Jan 10, 2018 at 2:11 PM, Stefan Priebe - Profihost AG >> <s.priebe@xxxxxxxxxxxx> wrote: >>> Hello, >>> >>> since upgrading to luminous i get the following error: >>> >>> HEALTH_ERR full ratio(s) out of order >>> OSD_OUT_OF_ORDER_FULL full ratio(s) out of order >>> backfillfull_ratio (0.9) < nearfull_ratio (0.95), increased >>> >>> but ceph.conf has: >>> >>> mon_osd_full_ratio = .97 >>> mon_osd_nearfull_ratio = .95 >>> mon_osd_backfillfull_ratio = .96 >>> osd_backfill_full_ratio = .96 >>> osd_failsafe_full_ratio = .98 >>> >>> Any ideas? i already restarted: >>> * all osds >>> * all mons >>> * all mgrs >> >> Perhaps your options are in the wrong section of your ceph.conf? They >> should be in [mon] or [global] -- sometimes these end up mistakenly in >> [osd]. > > The other thing is that only teh osd_failsafe_full_ratio is a runtime > option now (for the osd); the other ones only affect the mon during the > mkfs stage. The real thresholds are now stored in the OSDMap itself (see > 'ceph osd dump | grep full') and can be modified with > > ceph osd set-backfillfull-ratio <float[0.0-1.0]> > ceph osd set-full-ratio <float[0.0-1.0]> > ceph osd set-nearfull-ratio <float[0.0-1.0]> ah thanks! That fixed it. So i can remove all those settings from ceph.conf? > > sage > _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |