Re: Luminous, RGW bucket resharding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11-12-17 16:23, Orit Wasserman wrote:
> On Mon, Dec 11, 2017 at 4:58 PM, Sam Wouters <sam@xxxxxxxxx> wrote:
>> Hi Orrit,
>>
>>
>> On 04-12-17 18:57, Orit Wasserman wrote:
>>> Hi Andreas,
>>>
>>> On Mon, Dec 4, 2017 at 11:26 AM, Andreas Calminder
>>> <andreas.calminder@xxxxxxxxxx> wrote:
>>>> Hello,
>>>> With release 12.2.2 dynamic resharding bucket index has been disabled
>>>> when running a multisite environment
>>>> (http://tracker.ceph.com/issues/21725). Does this mean that resharding
>>>> of bucket indexes shouldn't be done at all, manually, while running
>>>> multisite as there's a risk of corruption?
>>>>
>>> You will need to stop the sync on the bucket before doing the
>>> resharding and start it again after the resharding completes.
>>> It will start a full sync on the bucket (it doesn't mean we copy the
>>> objects but we go over on all of them to check if the need to be
>>> synced).
>>> We will automate this as part of the reshard admin command in the next
>>> Luminous release.
>> Does this also apply to Jewel? Stop sync and restart after resharding.
>> (I don't know if there is any way to disable sync for a specific bucket.)
>>
> In Jewel we only support offline bucket resharding, you have to stop
> both zones gateways before resharding.
> Do:
> Execute the resharding radosgw-admin command.
> Run full sync on the bucket using: radosgw-admin bucket sync init on the bucket.
> Start the gateways.
>
> This should work but I have not tried it ...
> Regards,
> Orit
Is it necessary to really stop the gateways? We tend to block all
traffic to the bucket being resharded with the use of ACLs in the
haproxy in front, to avoid downtime for non related buckets.

Would a:

- restart gws with sync thread disabled
- block traffic to bucket
- reshard
- unblock traffic
- bucket sync init
- restart gws with sync enabled

work as well?

r,
Sam

>> r,
>> Sam
>>>> Also, as dynamic bucket resharding was/is the main motivator moving to
>>>> Luminous (for me at least) is dynamic reshardning something that is
>>>> planned to be fixed for multisite environments later in the Luminous
>>>> life-cycle or will it be left disabled forever?
>>>>
>>> We are planning to enable it in Luminous time.
>>>
>>> Regards,
>>> Orit
>>>
>>>> Thanks!
>>>> /andreas
>>>> _______________________________________________
>>>> ceph-users mailing list
>>>> ceph-users@xxxxxxxxxxxxxx
>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>> _______________________________________________
>>> ceph-users mailing list
>>> ceph-users@xxxxxxxxxxxxxx
>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>> _______________________________________________
>> ceph-users mailing list
>> ceph-users@xxxxxxxxxxxxxx
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux