Re: RFQ for Flowjo

Mike Jacobacci <mikej@xxxxxxxxxx> · Wed, 7 Sep 2016 11:02:53 -0700

Hey Henry, What a sec… That R101 is for our Nagios node, not apart of the Ceph monitoring nodes.  So both the R133 and the one R101 should have redundant power supplies.  Make sense?
Cheers
Mike
On Sep 7, 2016, at 10:55 AM, Henry Figueroa <henry.figueroa@xxxxxxxxxxxxxxxxxxxx> wrote:

MikeThe monitoring node (R101.v6) does not have a redundant power supply, I reconfigured on a R133.v6
Take a look and let me know if you approve, I will delete the R101.v6 after:
Web: http://www.siliconmechanics.com/quotes/316693?confirmation=608475029
    PDF: http://www.siliconmechanics.com/quotes/316693.pdf?confirmation=608475029

On Wed, Sep 7, 2016 at 10:39 AM, Mike Jacobacci <mikej@xxxxxxxxxx> wrote:
Hey Henry,
Ok, so we just need to make two changes on the RFQ’s and we can start today.

1.  RFQ 316693, please change to a redundant power supply.
2. Basically, move the two storage nodes to their own RFQ and everything else can be on the other RFQ.

We will be paying with check and will be ordering the storage nodes now, then the other nodes we can pay for on October 1st… Which leads me to my last question, when does billing happen in relationship with node building?  The reason I ask is that I want to get the other Nodes ASAP and would like to see if you could have them shipped the same day we pay for them (Oct. 1st)

Cheers,
Mike

On Aug 24, 2016, at 11:18 AM, Henry Figueroa <henry.figueroa@siliconmechanics.com> wrote:

MikeHere you go

RFQ:316153 - R513.v6 - Ceph Storage + Monitoring Nodes + Xen Server
R513.v6 Ceph 
R101.v6 Monitoring Nodes
R331.v6 Xen VM Server with H/W RAID

  Web: http://www.siliconmechanics.com/quotes/316153?confirmation=800709744
    PDF: http://www.siliconmechanics.com/quotes/316153.pdf?confirmation=800709744

RFQ:316693 R101.v6 QUAD-64GB-2x 80GB H/S RAID
Web: http://www.siliconmechanics.com/quotes/316693?confirmation=608475029
    PDF: http://www.siliconmechanics.com/quotes/316693.pdf?confirmation=608475029

Get me the credit info/FInancial asap so that I can review with our CFO

H

On Wed, Aug 24, 2016 at 11:04 AM, Mike Jacobacci <mikej@xxxxxxxxxx> wrote:
Hey Henry,
Yes I meant to say R331, that’s what you upgraded us too on the last order.  We would like the LSI 9361 4i RAID Controller installed along with the the 10Gbe card.  Let me know if you have any other questions.

Cheers,
Mike

On Aug 24, 2016, at 10:41 AM, Henry Figueroa <henry.figueroa@siliconmechanics.com> wrote:

MikeQuick question on the XEN Server.
We are using the R309.v6 Platform, only 1x PCI slot and that is being used up by the X710 10GbE SFP+, so there is not room for the HBA Card
I will transfer the config to the R331.v6 which has 2x PCI SLots
Now the question is .. Do you want an HBA or do you want a hardware RAID Controller?

Let me know asap
H

On Wed, Aug 24, 2016 at 10:19 AM, Henry Figueroa <henry.figueroa@siliconmechanics.com> wrote:
MIke/SethI hosed this up and did not get it done, that being said you were on my mind as this am I wrote a reminder to ask you about the quote ... :)
Give me 15 minutes,
On the mean time Seth asked for a credit app etc 
FYI Our terms are net/30  If you want better than N/45 my cfo will ask for financials/etc etc

I am including the app, complete & sign if you have a credit reference sheet send me that but do sign our agreement. I included our wire/ach info also.

H

On Wed, Aug 24, 2016 at 10:14 AM, Mike Jacobacci <mikej@xxxxxxxxxx> wrote:

Begin forwarded message:

From: Mike Jacobacci <mikej@xxxxxxxxxx>
Subject: Re: RFQ for Flowjo
Date: August 17, 2016 at 10:13:41 AM PDT
To: Henry Figueroa <henry.figueroa@siliconmechanics.com>

Hey Henry,
I know, I’m horrible! =D  But I got more for ya!  

1. Can I get an RFQ for 3 R101 servers to act as Ceph monitoring nodes.  You made us a quote here:
http://www.siliconmechanics.com/quotes/312908?confirmation=1390825971
We just need 3, not 4.

2. I would also like an RFQ for another XenServer, I can’t find the email with our last order, but I believe it was the R338.  One thing that we will need that wasn’t included last time is an HBA controller, the onboard software raid only works on windows servers not linux.

3. and lastly I would like another RFQ for a single R101 but with a quad core processor, 64gb of RAM, 2x 80gb SSDs and an HBA for mirroring.

If we get 90-day terms for everything (including the one I asked you for on Monday), we can place the order this week...  Let me know if you need anything else.

Cheers,
Mike

On Aug 15, 2016, at 4:08 PM, Henry Figueroa <henry.figueroa@siliconmechanics.com> wrote:

MikeYou don't call you don't write.. where have you been :) LOL
Nice! 
Here you go, let's pull the trigger this asap, drives are very difficult to get, I put some on hold!

RFQ:316153
Web: http://www.siliconmechanics.com/quotes/316153?confirmation=800709744
    PDF: http://www.siliconmechanics.com/quotes/316153.pdf?confirmation=800709744

Call me with any questions
I included the wire transfer info just in case, or you can call me with a credit card.

H

On Mon, Aug 15, 2016 at 3:06 PM, Mike Jacobacci <mikej@xxxxxxxxxx> wrote:
HI Henry,

Would you please make us an RFQ for two more storage servers with the same configuration as the one we already ordered?  I would like to get this over to our CTO this week.  Please let me know if you need anything else from me.

Cheers,

Mike

-- 