We use ceph-disk without any issues on CentOS7. If you want to do a manual deployment, verfiy you aren't missing any steps in http://ceph.com/docs/master/install/manual-deployment/#long-form. On Tue, Feb 24, 2015 at 5:46 PM, Barclay Jameson <almightybeeij@xxxxxxxxx> wrote: > I have tried to install ceph using ceph-deploy but sgdisk seems to > have too many issues so I did a manual install. After mkfs.btrfs on > the disks and journals and mounted them I then tried to start the osds > which failed. The first error was: > #/etc/init.d/ceph start osd.0 > /etc/init.d/ceph: osd.0 not found (/etc/ceph/ceph.conf defines , > /var/lib/ceph defines ) > > I then manually added the osds to the conf file with the following as > an example: > [osd.0] > osd_host = node01 > > Now when I run the command : > # /etc/init.d/ceph start osd.0 > > There is no error or output from the command and in fact when I do a > ceph -s no osds are listed as being up. > Doing as ps aux | grep -i ceph or ps aux | grep -i osd shows there are > no osd running. > I also have done htop to see if any process are running and none are shown. > > I had this working on SL6.5 with Firefly but Giant on Centos 7 has > been nothing but a giant pain. > _______________________________________________ > ceph-users mailing list > ceph-users@xxxxxxxxxxxxxx > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |