Le 07/03/2014 18:05, Stijn De Weirdt a écrit :
we tried this with a Dell H200 (also LSI2008 based).
however, running some basic benchmarks, we saw no immediate difference
between IT and IR firmware.
so i'd like to know: what kind of performance improvement do you get,
and how did you measure it it?
IMO, flashing to IT firmware is mainly done to get the JBOD feature,
which most of the time lacks with IR.
Cheers
thanks a lot
stijn
the howto for dell hardware:
http://en.community.dell.com/support-forums/servers/f/906/t/19382192.aspx
(we found out what is described here the hard way)
On 03/07/2014 05:58 PM, Mariusz Gronczewski wrote:
On Fri, 7 Mar 2014 15:41:46 +0000, Robert van Leeuwen
<Robert.vanLeeuwen@xxxxxxxxxxxxx> wrote:
I'm hoping to get some feedback on the Dell H310 (LSI SAS2008
chipset).
Based on searching I'd done previously I got the impression that
people
generally recommended avoiding it in favour of the higher specced H710
(LSI SAS2208 chipset).
Purely based on the controller chip it should be OK.
We are using Supermicro's with that chip and are happy about it.
( We have 2xSSD and 10x1TB disk)
Note that we are using a JBOD firmware, not sure if DELL provides that.
You can flash it with any firmware, our IBM controller uses firmware
from supermicro (because IBM doesn't provide IT FW for it)
I wouldn't use it for bunch of SSDs but for spinners performance is fine
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Cédric
_______________________________________________
ceph-users mailing list
ceph-users@xxxxxxxxxxxxxx
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
