Hi again Josh:
Here comes the recap of 10.2.8 status. All requested PRs have been
merged, so I ran a "rados" suite and an "upgrade/hammer-x" suite. There
were some failures, but most were obvious infrastructure noise and
disappeared on re-run. There were also two failures that stood out and
seemed like they might be real bugs:
[1] rados issue: http://tracker.ceph.com/issues/20449
[2] upgrade issue: http://tracker.ceph.com/issues/13381
Regarding [1], my initial analysis was wrong. The real cause of the
failure is a transient gevent/greenlet timeout; happens in about 40% of
the runs.
Regarding [2], Sage analyzed the initial failure in the tracker. I
re-ran the test on both smithi and vps with the following results:
* on vps, both jobs passed
* on smithi, one job passed and the other failed. However, the failure
was for a different reason ("ceph-objectstore-tool: exp list-pgs failure
with status 1") - see
http://pulpito.front.sepia.ceph.com/smithfarm-2017-06-30_09:08:18-upgrade:hammer-x-wip-jewel-backports-distro-basic-smithi/
* http://tracker.ceph.com/issues/13381 was not reproduced
What other testing do you think is needed before we send 10.2.8 to QE?
Nathan
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
