you can add debug_rados or debug_ms to rbd create command to see what
happened during 120s
2015-09-23 9:59 GMT+08:00 zhao.mingyue@xxxxxxx <zhao.mingyue@xxxxxxx>:
>
> ---原始邮件---
> 发件人: "陈杰"<276648178@xxxxxx>
> 发送时间: 2015年09月21日 17:52:19
> 收件人: "ceph-devel@xxxxxxxxxxxxxxx"<ceph-devel@xxxxxxxxxxxxxxx>;
> 主题: Ceph problem
>
> Dear ceph-devel
> I'm a software engineer for H3C,We found a ceph problem in the test,the need your help.
> If one of the hosts in the cluster is restarted,we run 'rbd create……' command will block 120 seconds,but the normal is blocked for 20 seconds.
> Cluster environment composed of three hosts,each host runs a monitor process and ten OSD processes
>
> Looking forward to your reply,Thank you!
> -------------------------------------------------------------------------------------------------------------------------------------
> 本邮件及其附件含有杭州华三通信技术有限公司的保密信息，仅限于发送给上面地址中列出
> 的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
> 或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
> 邮件！
> This e-mail and its attachments contain confidential information from H3C, which is
> intended only for the person or entity whose address is listed above. Any use of the
> information contained herein in any way (including, but not limited to, total or partial
> disclosure, reproduction, or dissemination) by persons other than the intended
> recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender
> by phone or email immediately and delete it!
--
thanks
huangjun
��.n��������+%������w��{.n����z��u���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
