Dear developers, I had tried asking similar question in ceph-users but had not had any reply so please forgive me for posting here. I had a slight issue with ceph-deploy (aside from the bug #4984) specifically during osd prepare and activate. I am trying to build cluster using some old HP servers and Ubuntu Precise, but unfortunately the devices in these HP came out as /dev/cciss/c0d0 and so on (or /dev/cciss/c0d0p1 if with partitions). So is there any possible workaround or where I can make changes since the ceph-deploy/ceph-disk is expecting something like /dev/sda instead? Thanks in advance. Regards, Luke ------------------------------------------------------------------ - - DISCLAIMER: This e-mail (including any attachments) is for the addressee(s) only and may contain confidential information. If you are not the intended recipient, please note that any dealing, review, distribution, printing, copying or use of this e-mail is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original message. MIMOS Berhad is a research and development institution under the purview of the Malaysian Ministry of Science, Technology and Innovation. Opinions, conclusions and other information in this e- mail that do not relate to the official business of MIMOS Berhad and/or its subsidiaries shall be understood as neither given nor endorsed by MIMOS Berhad and/or its subsidiaries and neither MIMOS Berhad nor its subsidiaries accepts responsibility for the same. All liability arising from or in connection with computer viruses and/or corrupted e-mails is excluded to the fullest extent permitted by law. -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
