Re: What would a good OSD node hardware configuration look like?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2012/11/7 Wido den Hollander <wido@xxxxxxxxx>:
> Except that SSDs will mainly fail due to the amount of write cycles they had
> to endure.
>
> So in RAID-1 your SSDs will fail at almost the same time.
>
> With for example 8 OSDs in a server you better spread them out 50/50 over
> two SSDs.

But the OS should be installed on SSD, to allow the use of the whole
SATA/SAS disk as OSDs.
Without RAID-1 between SSDs, a disk failure will result it the whole node down.
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [CEPH Users]     [Ceph Large]     [Information on CEPH]     [Linux BTRFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux