Nicolas Thierry-Mieg wrote:
Robert Moskowitz wrote:
That covers speed, but doesn't say anything about the duplex
setting. You should see this mentioned near the Ethernet driver load
lines in dmesg, too.
Do you see anything in the lines I pasted above? Those are the only
ones from dmesg.
try:
ethtool eth0
thanks:
ethtool eth1
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
