> > here's my problem - system was ok and mother board died. Purchased a new
> > motherboard and this is what I get...
> >
> > # hdparm -t /dev/md1
> >
> > /dev/md1:
> > Timing buffered disk reads: 4 MB in 3.68 seconds = 1.09 MB/sec
> >
> > which is dreadfully slow
Any decent system with PATA drives should show values in range 30~50 MB/sec. It would be more useful to get output from "hdparm -tT /dev/(yourdrive)"
Shots in the dark.
-- Does this system have SiL drive controller chip? I ran into similar out put problem with a MSI MoBo having that chipset two years back although with SATA drives.
HTH
--
Regards,
Sudev Barar
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
