I have found for pxe installs that tftp would only work (for me) if the
owner:group of the files/directories in question are nobody:nogroup
Jeff
On Thu, 2006-12-28 at 14:05 -0600, Mark Snyder wrote:
>
> chrism@xxxxxxxxx wrote:
> > Mark Snyder wrote:
> >>
> >> tftp keeps timing out when I try to transfer files. I intend to
use
> >> tftp with G4U to clone a standard workstation. I am testing it
between
> >> two Dell poweredge servers running CentOS 4.3. "chkconfig --list
> >> |grep tftp" shows tftp up and running on both boxes. When connected
> >> "tftp>status" shows it is talking to the other box
> >> "tptp>trace" shows "sent WRQ <file=slavelit, mode=netascii>" and
ends
> >> with Transfer timed out.
> >>
> >> I have tftp is being run under xinetd.
> >>
> >> I have modified /etc/xinetd.d/tftpd as follows:
> >>
> >> server_args -p -c -U 002 -u install -s /tster
> >>
> >> I have setup a user install, set read/write privileges on /tster
which
> >> is owned by install
> >>
> >> Not sure what else I need to do to get this working, any
suggestions
> >> would be appreciated
> >
> > Have you checked the usual culprits? SELINUX or iptables? Try
> > disabling them one at a time and see if the bad behavior disappears.
> >
>
> both are disabled, but it was a good thought.
>
> > Cheers,
> >
> > _______________________________________________
> > CentOS mailing list
> > CentOS@xxxxxxxxxx
> > http://lists.centos.org/mailman/listinfo/centos
> >
> >
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
