Re: Trying to override MAC addr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Ыcwqacddpp
On Aug 21, 2014 6:31 PM, "Robert Moskowitz" <rgm@xxxxxxxxxxxxxxx> wrote:

> Did not work...
>
> On 08/21/2014 10:15 AM, Reindl Harald wrote:
> >
> > Am 21.08.2014 um 16:09 schrieb Robert Moskowitz:
> >> I am trying to override the mac addr.  Now this is on an armv7 actually
> >> running the F19 kernel and Redsleeve 6, but it SHOULD be standard
> >> Centos6 ifcfg-eth0 content.  Of course RSEL does not start with a
> >> ifcfg-eth0 file, letting network services do all the work, so I am
> >> starting from scratch, using the file from one of my C6 boxes with
> >> static addressing.  My file has in it:
> >>
> >> DEVICE="eth0"
> >> BOOTPROTO=none
> >> NM_CONTROLLED="no"
> >> ONBOOT="yes"
> >> TYPE="Ethernet"
> >> NAME="System eth0"
> >> DNS1=208.83.67.188
> >> GATEWAY="208.83.67.177"
> >> IPADDR="208.83.67.179"
> >> HOSTNAME="rigel2.htt-consult.com"
> >> IPV6INIT="yes"
> >> MACADDR=02:67:15:00:01:79
> >> MTU=1500
> > that's easy - you need to tell it the physical too
> > works from Fedora 10 up to Fedora 20 that way
> >
> > [root@srv-rhsoft:~]$ cat ifcfg-eth1
> > DEVICE=eth1
> > HWADDR=68:05:ca:0d:62:c1
> > MACADDR=00:50:8d:b5:cc:de
> >
> > "00:50:8d:b5:cc:de" is the on my interface has after it is up
> > "68:05:ca:0d:62:c1" is the pysical one of the device before fake it
> >
> > [root@srv-rhsoft:~]$ ifconfig eth1
> > eth1: flags=67<UP,BROADCAST,RUNNING>  mtu 1500
> >          inet 62.178.103.85  netmask 255.255.255.0  broadcast
> 255.255.255.255
> >          ether 00:50:8d:b5:cc:de  txqueuelen 500  (Ethernet)
> >          RX packets 74959980  bytes 25037014848 (23.3 GiB)
> >          RX errors 0  dropped 0  overruns 0  frame 0
> >          TX packets 67607627  bytes 39867204808 (37.1 GiB)
> >          TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
> >          device interrupt 16  memory 0xf7cc0000-f7ce0000
> >
> # cat > /etc/sysconfig/network-scripts/ifcfg-eth0
> DEVICE="eth0"
> BOOTPROTO=none
> NM_CONTROLLED="no"
> ONBOOT="yes"
> TYPE="Ethernet"
> NAME="System eth0"
> HWADDR=02:c3:04:01:77:c3
> MACADDR=02:67:15:00:01:79
> MTU=1500
> DNS1=208.83.67.188
> GATEWAY="208.83.67.177"
> IPADDR="208.83.67.179"
> HOSTNAME="rigel2.htt-consult.com"
> IPV6INIT="yes"
> [root@redsleeve ~]# service network restart
> Shutting down loopback interface:  [  OK  ]
> Bringing up loopback interface:  [  OK  ]
> Bringing up interface eth0:  Device eth0 has different MAC address than
> expected, ignoring.
> [FAILED]
>
> And now not even an eth1 interface.
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos





[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux