Did not work...
On 08/21/2014 10:15 AM, Reindl Harald wrote:
>
> Am 21.08.2014 um 16:09 schrieb Robert Moskowitz:
>> I am trying to override the mac addr. Now this is on an armv7 actually
>> running the F19 kernel and Redsleeve 6, but it SHOULD be standard
>> Centos6 ifcfg-eth0 content. Of course RSEL does not start with a
>> ifcfg-eth0 file, letting network services do all the work, so I am
>> starting from scratch, using the file from one of my C6 boxes with
>> static addressing. My file has in it:
>>
>> DEVICE="eth0"
>> BOOTPROTO=none
>> NM_CONTROLLED="no"
>> ONBOOT="yes"
>> TYPE="Ethernet"
>> NAME="System eth0"
>> DNS1=208.83.67.188
>> GATEWAY="208.83.67.177"
>> IPADDR="208.83.67.179"
>> HOSTNAME="rigel2.htt-consult.com"
>> IPV6INIT="yes"
>> MACADDR=02:67:15:00:01:79
>> MTU=1500
> that's easy - you need to tell it the physical too
> works from Fedora 10 up to Fedora 20 that way
>
> [root@srv-rhsoft:~]$ cat ifcfg-eth1
> DEVICE=eth1
> HWADDR=68:05:ca:0d:62:c1
> MACADDR=00:50:8d:b5:cc:de
>
> "00:50:8d:b5:cc:de" is the on my interface has after it is up
> "68:05:ca:0d:62:c1" is the pysical one of the device before fake it
>
> [root@srv-rhsoft:~]$ ifconfig eth1
> eth1: flags=67<UP,BROADCAST,RUNNING> mtu 1500
> inet 62.178.103.85 netmask 255.255.255.0 broadcast 255.255.255.255
> ether 00:50:8d:b5:cc:de txqueuelen 500 (Ethernet)
> RX packets 74959980 bytes 25037014848 (23.3 GiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 67607627 bytes 39867204808 (37.1 GiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> device interrupt 16 memory 0xf7cc0000-f7ce0000
>
# cat > /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO=none
NM_CONTROLLED="no"
ONBOOT="yes"
TYPE="Ethernet"
NAME="System eth0"
HWADDR=02:c3:04:01:77:c3
MACADDR=02:67:15:00:01:79
MTU=1500
DNS1=208.83.67.188
GATEWAY="208.83.67.177"
IPADDR="208.83.67.179"
HOSTNAME="rigel2.htt-consult.com"
IPV6INIT="yes"
[root@redsleeve ~]# service network restart
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Device eth0 has different MAC address than
expected, ignoring.
[FAILED]
And now not even an eth1 interface.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
