I am trying to override the mac addr. Now this is on an armv7 actually
running the F19 kernel and Redsleeve 6, but it SHOULD be standard
Centos6 ifcfg-eth0 content. Of course RSEL does not start with a
ifcfg-eth0 file, letting network services do all the work, so I am
starting from scratch, using the file from one of my C6 boxes with
static addressing. My file has in it:
DEVICE="eth0"
BOOTPROTO=none
NM_CONTROLLED="no"
ONBOOT="yes"
TYPE="Ethernet"
NAME="System eth0"
DNS1=208.83.67.188
GATEWAY="208.83.67.177"
IPADDR="208.83.67.179"
HOSTNAME="rigel2.htt-consult.com"
IPV6INIT="yes"
MACADDR=02:67:15:00:01:79
MTU=1500
And when I restart network, it can't find eth0:
# service network restart
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,
delaying initialization.
[FAILED]
but:
# ifconfig
eth1 Link encap:Ethernet HWaddr 02:67:15:00:01:79
inet addr:208.83.67.179 Bcast:208.83.67.255 Mask:255.255.255.0
inet6 addr: 2607:f4b8:3:3:67:15ff:fe00:179/64 Scope:Global
inet6 addr: fe80::67:15ff:fe00:179/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:254 errors:0 dropped:17 overruns:0 frame:0
TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26575 (25.9 KiB) TX bytes:6104 (5.9 KiB)
Interrupt:87 Base address:0x6000
The assigned MAC addr for eth0 is: 02:c3:04:01:77:c3
The tutorials that I have found on ifcfg-ethN say not to use both hwaddr
and macaddr in the same cfg file, but it almost seems that is what is
needed?
thanks
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
