Hi I just installed CentOS 3.3 (Will try 4 later). I have 10 x 250GB harddisk which I build in a Raid-5 Config. /proc/mdstat: Personalities : [raid5] read_ahead 1024 sectors Event: 2 md0 : active raid5 hdl1[9] hdk1[8] hdj1[7] hdi1[6] hdh1[5] hdg1[4] hdf1[3] hde1[2] hdd1[1] hdb1[0] -2088962752 blocks level 5, 64k chunk, algorithm 0 [10/10] [UUUUUUUUUU] [>....................] resync = 2.8% (6954048/245111616) finish=387.2min speed=10249K/sec unused devices: <none> /etc/raidtab: raiddev /dev/md0 raid-level 5 nr-raid-disks 10 chunk-size 64k persistent-superblock 1 nr-spare-disks 0 device /dev/hdb1 raid-disk 0 device /dev/hdd1 raid-disk 1 device /dev/hde1 raid-disk 2 device /dev/hdf1 raid-disk 3 device /dev/hdg1 raid-disk 4 device /dev/hdh1 raid-disk 5 device /dev/hdi1 raid-disk 6 device /dev/hdj1 raid-disk 7 device /dev/hdk1 raid-disk 8 device /dev/hdl1 raid-disk 9 /dev/md0 57601604 32828 54642732 1% /volume1 /dev/md0 shows as 50GB when I did a df. Is there a size limitation to the biggest software raid on a default kernel installation? Thanks in advance. Regards.