On Mon, Aug 01, 2022 at 10:50:06PM -0500, Ulises Vega wrote: > Hello everyone, Hi, > > I'm facing the following problem to build the marlin release, it marks me > this error and there is nothing deployed. I'm using opensuse 15.2 on > virtual box 6.1.34, I installed all pre required packages from the yocto > documentation. I run the following commands: > > > > > *source meta-agl/scripts/aglsetup.sh -m qemux86-64 -b qemux86-64 agl-demo > agl-develtime bitbake agl-demo-platform* > > > I added this lines to local.conf: > > > > *SSTATE_DIR = "/home/ulisesv/AGL/sstate-cache"DL_DIR = > "/home/ulisesv/AGL/downloads"SSTATE_MIRRORS_append = " file://.* > https://download.automotivelinux.org/sstate-mirror/marlin/${DEFAULTTUNE}/PATH > <https://download.automotivelinux.org/sstate-mirror/marlin/$%7BDEFAULTTUNE%7D/PATH> > \n "* > > and this lines to site.conf (inside <buidl-dir>/conf/site.conf, > build-dir=qemux86_64 see below) > > > > > *# reuse download directoriesDL_DIR = > "/home/ulisesv/AGL/downloads/"SSTATE_DIR = > "/home/ulisesv/AGL/sstate-cache/"* > > and got the following errors: > > > > > > *bLLVMSupport.a lib/libLLVMDemangle.a -lz -lrt -ldl -ltinfo -lpthread > -lm -lxml2 && :| collect2: fatal error: ld terminated with signal 9 > [Killed]| compilation terminated.| ninja: build stopped: subcommand > failed.| WARNING: /home/ulisesv/AGL/marlin/**qemux86-64/tmp/work/corei7-64-* > *agl-linux/llvm/9.0.1-r0/temp/* > *run.do_compile.3791:1 exit 1 from 'ninja -v -j 1'| ERROR: Execution of > '/home/ulisesv/AGL/marlin/**qemux86-64/tmp/work/corei7-64-* > *agl-linux/llvm/9.0.1-r0/temp/* > *run.do_compile.3791' failed with exit code 1ERROR: Task > (/home/ulisesv/AGL/marlin/**external/poky/meta/recipes-* > *devtools/llvm/llvm_git.bb:do_* What does dmesg say? Who killed the linker? You're mentioning VBox, do you do the build inside the VM? Kind of sounds like a OOM might be happening. > > > > *compile) failed with exit code '1'NOTE: Tasks Summary: Attempted 1311 > tasks of which 1310 didn't need to be rerun and 1 failed.Summary: 1 task > failed: /home/ulisesv/AGL/marlin/**external/poky/meta/recipes-* > *devtools/llvm/llvm_git.bb:do_* > > > > > > *compileSummary: There was 1 ERROR message shown, returning a non-zero exit > code.real 39m14.523suser 0m3.932ssys > 0m0.518sulisesv@localhost:~/AGL/* > > > > *marlin/qemux86-64> ls -la tmp/deploy/total 0drwxr-xr-x 1 ulisesv users 16 > Jul 30 18:18 .drwxr-xr-x 1 ulisesv users 270 Jul 30 19:20 ..drwxr-xr-x 1 > ulisesv users 482 Jul 29 21:17 licenses* > > *I followed some steps in this link but it didn't work either:* > *https://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-June/002112.html > <https://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-June/002112.html>* > > > *this seems to be similar error but mostly looks different source of error:* > *https://github.com/AFLplusplus/AFLplusplus/issues/40 > <https://github.com/AFLplusplus/AFLplusplus/issues/40>* > > Any idea why this is happening? > > Thank you for your help. > > Ulises Vega > > > On Wed, Jul 20, 2022 at 8:54 PM Ulises Vega via lists.automotivelinux.org > <usva.techdev=gmail.com@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > Hello everyone, > > > > I have finally got hands on as I expected and finished my ramp up. > > > > I will start working on porting AGL to BBAI this week. > > > > I'll first start by bringing AGL alive in qemu to understand the basics of > > bringing up AGL and then from there I'll start following the suggestions > > from Scott in previous email. > > > > I'll keep everyone posted and send you questions > > > > Thanks. > > > > Ulises Vega > > > > On Mon, Mar 7, 2022 at 9:22 PM Ulises Vega via lists.automotivelinux.org > > <usva.techdev=gmail.com@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > >> Hello everyone, > >> > >> This message is just to let you know that I've been able to ramp up some > >> theoretical topics on embedded linux and some practical parts of it but not > >> really able to get my hands on as I would have desired to start bringing up > >> AGL on the BBAI. > >> > >> I continue working on it but still have a long way to go. > >> > >> If you are not in a hurry give me some more time to get into this > >> otherwise feel free to go ahead and make the port. > >> > >> Thanks. > >> > >> Ulises > >> > >> > >> > >> On Thu, Jan 20, 2022 at 8:50 PM Ulises Vega via lists.automotivelinux.org > >> <usva.techdev=gmail.com@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > >> > >>> Hi Scott & everyone, > >>> > >>> I haven't been able to get onto this. I'm still ramping up and just > >>> changed jobs. I'm planning to be ready to start with these in I hope no > >>> more than 4 more weeks. > >>> > >>> If you are not in a hurry I still want to take from there the porting of > >>> AGL to BBAI. If not I can understand someone else to do it earlier. > >>> > >>> Thanks. > >>> > >>> Ulises > >>> > >>> On Wed, Dec 15, 2021 at 5:58 PM Ulises Vega via > >>> lists.automotivelinux.org <usva.techdev= > >>> gmail.com@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > >>> > >>>> Hi Scott, > >>>> > >>>> > >>>> Thank you for your prompt answer. > >>>> > >>>> Yes it is a lot to bite off. I will be taking some trainings on > >>>> yocto/oe in the next weeks self teaching based on open training from > >>>> bootlin I think that will help me start. > >>>> > >>>> I hope I can get back to you by the second week of January when I think > >>>> I might be ready to start working on this topic. Obviously if you are not > >>>> in a hurry :). > >>>> > >>>> Thanks. > >>>> > >>>> Ulises > >>>> > >>>> El mié., 15 de dic. de 2021 17:03, Scott Murray < > >>>> scott.murray@xxxxxxxxxxxx> escribió: > >>>> > >>>>> On Wed, 15 Dec 2021, Ulises Vega wrote: > >>>>> > >>>>> > Hi Walt, > >>>>> > > >>>>> > Thanks for your prompt reply. That could be much better. I would > >>>>> like to > >>>>> > help to get up running the BBAI. This could be a good learning > >>>>> opportunity. > >>>>> > > >>>>> > What do you think?. > >>>>> > >>>>> I checked with one of the meta-ti layer maintainers, the machine > >>>>> configuration am57xx-evm in it should support the BB AI, and TI > >>>>> do list the board as supported in: > >>>>> > >>>>> > >>>>> https://www.ti.com/tool/download/PROCESSOR-SDK-LINUX-AM57X#supported-products-and-hardware > >>>>> > >>>>> So you could attempt creating a machine template for AGL that builds > >>>>> for am57xx-evm, take a look at the files under > >>>>> meta-agl/templates/machine/bbe and meta-agl/templates/machine/j7-evm in > >>>>> the source tree to potentially use as a starting point. I suspect what > >>>>> you'd want to do is use j7-evm as your reference, then copy in some of > >>>>> the graphics related bits from the bbe template if you do care about > >>>>> graphics working. Also, I believe you can drop the multiconfig related > >>>>> parts from the j7-evm template, as from poking around in meta-ti it > >>>>> looks > >>>>> like it does not need them. > >>>>> > >>>>> If you're new to AGL and especially new to using OpenEmbedded / > >>>>> Yocto Project, the above may be a lot to bite off as a first project. > >>>>> > >>>>> Scott > >>>>> > >>>>> > >>> > >>> -- > >>> Ulises S. Vega A. > >>> > >>> > >> > >> -- > >> Ulises S. Vega A. > >> > >> > > > > -- > > Ulises S. Vega A. > > > > > > > > -- > Ulises S. Vega A. > > > > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#10031): https://lists.automotivelinux.org/g/agl-dev-community/message/10031 Mute This Topic: https://lists.automotivelinux.org/mt/87734066/2167316 Group Owner: agl-dev-community+owner@xxxxxxxxxxxxxxxxxxxxxxxxx Unsubscribe: https://lists.automotivelinux.org/g/agl-dev-community/leave/4543822/2167316/883735764/xyzzy [list-automotive-discussions82@xxxxxxxxxxx] -=-=-=-=-=-=-=-=-=-=-=-
Attachment:
signature.asc
Description: PGP signature
