[PATCH] fix additional typing errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix additional typing errors of various files.

Signed-off-by: Andreas P <nurgrak@xxxxxxxxx>

---
 INSTALL                        |  2 +-
 README                         |  9 ++++-----
 README.replicated-server       |  2 +-
 configure                      |  2 +-
 man/auto.master.5.in           | 14 +++++++-------
 man/autofs.5                   |  9 ++++-----
 man/autofs.conf.5.in           | 20 ++++++++++----------
 man/autofs_ldap_auth.conf.5.in |  2 +-
 man/automount.8                |  2 +-
 modules/lookup_ldap.c          |  4 ++--
 modules/replicated.c           |  4 ++--
 redhat/autofs.conf.default.in  | 14 +++++++-------
 redhat/autofs.sysconfig        |  2 +-
 samples/autofs.conf.default.in | 12 ++++++------
 14 files changed, 48 insertions(+), 50 deletions(-)

diff --git a/INSTALL b/INSTALL
index 68a4376..db356c2 100644
--- a/INSTALL
+++ b/INSTALL
@@ -119,7 +119,7 @@ For example, Fedora Core 4 kernel package 2.6.11-
1.369_FC4
 would use the 2.6.12 patch because it applies the 2.6.12 release
 candidate revision 6 patch. But the autofs patch doesn't apply
 because the rpm also applies a patch somewhere that changes one
-area the the patch also changes but this change is not present
+area the patch also changes but this change is not present
 in the 2.6.12 release kernel.
 
 On the other hand, Fedora Core 3 kernel 2.6.12-1.1381_FC3
diff --git a/README b/README
index 9024e64..124f1d1 100644
--- a/README
+++ b/README
@@ -1,4 +1,3 @@
--*- text -*-
 
 autofs is a kernel-based automounter for Linux.  It performs a job
 similar to amd(8) but relies on a small stub of kernel code instead of
@@ -16,13 +15,13 @@ To build autofs, please run:
 
 	./configure
 
-to configure the system.  See README.options for options that you can
+To configure the system.  See README.options for options that you can
 give configure.
 
 After configuring, you can:
 
 	make			... make the daemon and modules
-	make install		... install the daemon and modules
+	make install	... install the daemon and modules
 
 Development kernels 2.3.41 and onwards contain the autofs4 as
 standard.  If you're using 2.2, you can apply the patch in
@@ -57,6 +56,6 @@ Once subscribed you can send patches to:
 
 The autofs mailing list archive can be viewed on gmane:
 
-	http://news.gmane.org/gmane.linux.kernel.autofs
-	http://blog.gmane.org/gmane.linux.kernel.autofs
+	http://news.gmane.org/gmane.linux.kernel.autofs 
+	http://blog.gmane.org/gmane.linux.kernel.autofs 
 
diff --git a/README.replicated-server b/README.replicated-server
index 1d771d3..a0e742c 100644
--- a/README.replicated-server
+++ b/README.replicated-server
@@ -34,7 +34,7 @@ the following selection rules.
      - PROXIMITY_OTHER, host is on a network not directlty
        reachable through a local interface.
   
-2) NFS version and protocol is selected by caclculating the largest
+2) NFS version and protocol is selected by calculating the largest
    number of hosts supporting an NFS version and protocol that
    have the closest proximity. These hosts are added to the list
    in response time order. Hosts may have a corresponding weight
diff --git a/configure b/configure
index 40f4dd3..af18359 100755
--- a/configure
+++ b/configure
@@ -2419,7 +2419,7 @@ $as_echo "no" >&6; }
 fi
 
 #
-# Check for systemd unit files direectory exists if unit file
installation
+# Check for systemd unit files directory exists if unit file
installation
 # is requested
 #
 
diff --git a/man/auto.master.5.in b/man/auto.master.5.in
index 68242d4..ad630f5 100644
--- a/man/auto.master.5.in
+++ b/man/auto.master.5.in
@@ -203,12 +203,12 @@ and non-root offest mount entries.
 This option allows mount propagation of bind mounts to be set to
 either \fIslave\fP or \fIprivate\fP. This option may be needed when
using
 multi-mounts that have bind mounts that bind to a file system that is
-propagation shared. This is becuase the bind mount will have the same
+propagation shared. This is because the bind mount will have the same
 properties as its target which causes problems for offset mounts. When
 this happens an unwanted offset mount is propagated back to the target
 file system resulting in a deadlock when attempting to access the
offset.
-This option is a an autofs pseudo mount option that can be used in the
-master map only. By default bind mounts will inherit the mount
propagation
+This option is an autofs pseudo mount option that can be used in the
+master map only. By default, bind mounts will inherit the mount
propagation
 of the target file system.
 .TP
 .I "\-r, \-\-random-multimount-selection"
@@ -253,7 +253,7 @@ accessing /net/myserver will mount exports from
myserver on directories below
 /net/myserver.
 .P
 NOTE: mounts done from a hosts map will be mounted with the
"nosuid,nodev,intr" options
-unless overridden by explicily specifying the "suid", "dev" or
"nointr" options in the
+unless overridden by explicitly specifying the "suid", "dev" or
"nointr" options in the
 master map entry.
 .SH LDAP MAPS
 If the map type \fBldap\fP is specified the mapname is of the form
@@ -269,7 +269,7 @@ configuration, in which case the map name alone
must be given.
 .P
 If no schema is set in the autofs configuration then autofs will check
 each of the commonly used schema for a valid entry and if one is found
-it will used for subsequent lookups.
+it will be used for the subsequent lookups.
 .P
 There are three common schemas in use:
 .TP
@@ -343,7 +343,7 @@ connection is to be used then the client
certificate and private key file
 locations must also be configured within the LDAP client.
 .P
 In OpenLDAP these may be configured in the \fBldap.conf\fP file or in
the
-per-user configuration. For example it may be sensible to use the
system
+per-user configuration. For example it, may be sensible to use the
system
 wide configuration for the location of the Certificate Authority
certificate
 and set the location of the client certificate and private key
 in the per-user configuration. The location of these files and the
configuration
@@ -391,5 +391,5 @@ configuration will be used to locate the source of
the map
 .BR autofs_ldap_auth.conf (5).
 .SH AUTHOR
 This manual page was written by Christoph Lameter <chris@xxxxxxxxxx>,
-for the Debian GNU/Linux system.  Edited by <hpa@xxxxxxxxxxxxx> and
+for the Debian GNU/Linux system. Edited by <hpa@xxxxxxxxxxxxx> and
 Ian Kent <raven@xxxxxxxxxx> .
diff --git a/man/autofs.5 b/man/autofs.5
index 2c224e1..bace28d 100644
--- a/man/autofs.5
+++ b/man/autofs.5
@@ -64,7 +64,6 @@ can't be mounted.
 .br
 is used to make the weight the sole factor in selecting a server when
multiple
 servers are present in a map entry.
-and
 .TP
 .B \-no-use-weight-only
 .br
@@ -192,7 +191,7 @@ SHOST	Short hostname (domain part removed if
present)
 .sp
 If a program map is used these standard environment variables will
have
 a prefix of "AUTOFS_" to prevent interpreted languages like python
from
-being able to load and execute arbitray code from a user home
directory.
+being able to load and execute arbitrary code from a user home
directory.
 .RE
 .sp
 Additional entries can be defined with the \-Dvariable=Value map-
option to
@@ -293,10 +292,10 @@ may be negated with the \fB!\fP.
 For a \fBlocation\fP to be selected for a mount attempt all of its
\fBselectors\fP
 must evaluate to true. If a \fBlocation\fP is selected for a mount
attempt
 and succeeds the lookup is completed and returns success. If the mount
-attempt fails the proceedure continues with the next \fBlocation\fP
until
+attempt fails the procedure continues with the next \fBlocation\fP
until
 they have all been tried.
 
-In addition some \fBselectors\fP take no argumenets, some one argument
+In addition, some \fBselectors\fP take no argumenets, some one
argument
 and others optionally take two arguments.
 
 The \fBselectors\fP that take no arguments are:
@@ -584,7 +583,7 @@ In the first line we have an NFS remote mount of
the exported directory
 another nfs mount for the exported directory /work/util from host
zeus.
 This would be mounted on /test/util.
 
-Finally we have an example of the use of the \fBsublink\fP option. In
+Finally, we have an example of the use of the \fBsublink\fP option. In
 this case the filesystem bilbo:/shared would be mounted on a path
 external the automount directory (under the direcory given by
 configuration option auto_dir) and the path /test/local either
diff --git a/man/autofs.conf.5.in b/man/autofs.conf.5.in
index cd7fc2f..de463f7 100644
--- a/man/autofs.conf.5.in
+++ b/man/autofs.conf.5.in
@@ -84,7 +84,7 @@ set default log level "none", "verbose" or "debug"
(program default "none").
 .B force_standard_program_map_env
 .br
 override the use of a prefix with standard environment variables when
a
-program map is executed. Since program maps are run as the privileded
+program map is executed. Since program maps are run as the privileged
 user setting these standard environment variables opens automount(8)
to
 potential user privilege escalation when the program map is written in
a
 language that can load components from, for example, a user home
directory
@@ -103,14 +103,14 @@ and a direct map with 8000 entries would result
in each slot
 containing an average of 8 entries, which should be acceptable.
 
 However, if excessive CPU usage is observed during automount lookups
-increasing this option can reduce the CPU overhead considerably
becuase
+increasing this option can reduce the CPU overhead considerably
because
 it reduces the length of the search chains.
 
 Note that the number of entries in a map doesn't necessarily relate
 to the number of entries used in the map entry cache.
 
 There are three distinct cases, direct maps and indirect maps that
-use the "browse" option must be read in their entirity at program
+use the "browse" option must be read in their entirety at program
 start so, in these two cases the map size does retate directly to
 the map entry cache size.
 
@@ -156,7 +156,7 @@ don't wait.
 .B use_mount_request_log_id
 .br
 Set whether to use a mount request log id so that log entries for
specific
-mount requests can be easily identified in logs that have multiple
conncurrent
+mount requests can be easily identified in logs that have multiple
concurrent
 requests. Default is don't use mount request log ids.
 .SS LDAP Configuration
 .P
@@ -165,7 +165,7 @@ Configuration settings available are:
 .B ldap_timeout
 .br
 Set the network response timeout (default 8).
-Set timeout value for the synchronous API  calls. The default is the
LDAP
+Set timeout value for the synchronous API calls. The default is the
LDAP
 library default of an infinite timeout.
 .TP
 .B ldap_network_timeout
@@ -305,7 +305,7 @@ cleaned on re-load, which is done when map changes
are detected
 so these configuration entries are not used by autofs. An
 exception to this is the case where the map is large. In this
 case it may be necessary to read the whole map at startup even if
-browsing is is not enabled. Adding the cache:=all option to
+browsing is not enabled. Adding the cache:=all option to
 map_options can be used to for this.
 .TP
 .B localhost_address
@@ -372,13 +372,13 @@ and that will be done.
 Allow map keys to be shown in directory listings. This option
 can have values of "yes" or "no". The default is "no". A variation
 of this option, "browsable", can be used as a pseudo mount option
-in type "auto" map entries to provide provide browsing funtionality
+in type "auto" map entries to provide browsing functionality
 in sub-mounts. The amd "browsable_dirs = full" option cannot be
 implemented within the current autofs framework and is not supported.
 .TP
 .B exec_map_timeout
 .br
-A timeout is not currently used for for program maps, might be
+A timeout is not currently used for program maps, might be
 implemented.
 .TP
 .B tag
@@ -455,7 +455,7 @@ its official host name.
 .TP
 .B domain_strip
 .br
-If set to "yes" the domain name part of the host is strippped
+If set to "yes" the domain name part of the host is stripped
 when normalizing hostnames. This can be useful when using of
 the same maps in a multiple domain environment.
 .TP
@@ -479,7 +479,7 @@ that is used for queries if ldap is to be used as a
map source.
 .B ldap_hostports
 .br
 This option has no default value set. It must be set to the URI
-of the LDAP server to be used for lookups wheni ldap is used a
+of the LDAP server to be used for lookups when ldap is used as
 map source. It may contain a comma or space separated list of
 LDAP URIs.
 .TP
diff --git a/man/autofs_ldap_auth.conf.5.in
b/man/autofs_ldap_auth.conf.5.in
index e035ebe..2357566 100644
--- a/man/autofs_ldap_auth.conf.5.in
+++ b/man/autofs_ldap_auth.conf.5.in
@@ -56,7 +56,7 @@ required in order to perform ldap queries. If the
flag is set to yes, only
 sasl authenticated connections will be allowed. If it is set to no
then
 authentication is not needed for ldap server connections. If it is set
to
 autodetect then the ldap server will be queried to establish a
suitable sasl
-authentication  mechanism. If no suitable mechanism can be found,
connections
+authentication mechanism. If no suitable mechanism can be found,
connections
 to the ldap server are made without authentication. Finally, if it is
set to
 simple, then simple authentication will be used instead of SASL.
 .TP
diff --git a/man/automount.8 b/man/automount.8
index 9f92288..1cca6ef 100644
--- a/man/automount.8
+++ b/man/automount.8
@@ -89,7 +89,7 @@ that would be used by autofs for the whole multi-map
will be listed.
 .TP
 .I "\-O, \-\-global-options"
 Allows the specification of global mount options used for all master
-map entries. These options will either replace or be appened to
options
+map entries. These options will either replace or be appended to
options
 given in a master map entry depending on the APPEND_OPTIONS
configuration
 setting.
 .TP
diff --git a/modules/lookup_ldap.c b/modules/lookup_ldap.c
index f7432a2..3624dd8 100644
--- a/modules/lookup_ldap.c
+++ b/modules/lookup_ldap.c
@@ -1320,11 +1320,11 @@ auth_fail:
 		ret |= get_property(logopt, root,
"external_key",  &extern_key);
 		/*
 		 * For EXTERNAL auth to function we need a client
certificate
-		 * and and certificate key. The ca certificate used to
verify
+		 * and certificate key. The ca certificate used to
verify
 		 * the server certificate must also be set correctly in
the
 		 * global configuration as the connection must be
encrypted
 		 * and the server and client certificates must have
been
-		 * verified for the EXTERNAL method to be offerred by
the
+		 * verified for the EXTERNAL method to be offered by
the
 		 * server. If the cert and key have not been set in the
autofs
 		 * configuration they must be set in the ldap rc file.
 		 */
diff --git a/modules/replicated.c b/modules/replicated.c
index 740270e..835fa23 100644
--- a/modules/replicated.c
+++ b/modules/replicated.c
@@ -24,11 +24,11 @@
  *        - PROXIMITY_OTHER, host is on a network not directlty
  *          reachable through a local interface.
  *
- *   2) NFS version and protocol is selected by caclculating the
largest
+ *   2) NFS version and protocol is selected by calculating the
largest
  *      number of hosts supporting an NFS version and protocol that
  *      have the closest proximity. These hosts are added to the list
  *      in response time order. Hosts may have a corresponding weight
- *      which essentially increaes response time and so influences the
+ *      which essentially increases response time and so influences
the
  *      host order.
  *
  *   3) Hosts at further proximity that support the selected NFS
version
diff --git a/redhat/autofs.conf.default.in
b/redhat/autofs.conf.default.in
index d4010c1..52efe26 100644
--- a/redhat/autofs.conf.default.in
+++ b/redhat/autofs.conf.default.in
@@ -70,7 +70,7 @@ mount_nfs_default_protocol = 4
 #			are run as the privileged user this opens
 #			automount(8) to potential user privilege
 #			escalation when the program map is written
-#			in a language that  can load components from,
+#			in a language that can load components from,
 #			for example, a user home directory.
 #
 # force_standard_program_map_env = no
@@ -78,7 +78,7 @@ mount_nfs_default_protocol = 4
 # use_mount_request_log_id - Set whether to use a mount request log
 #			id so that log entries for specific mount
 #			requests can be easily identified in logs
-#			that have multiple conncurrent requests.
+#			that have multiple concurrent requests.
 #
 #use_mount_request_log_id = no
 #
@@ -394,10 +394,10 @@ dismount_interval = 300
 # appears to work reasonably well most of the time without the
 # update).
 #
-# autofs_use_lofs = yes
+#autofs_use_lofs = yes
 #
 # Several configuration options can be set per mount point.
-# In particulr map_type, map_name, map_defaults, search_path,
+# In particular map_type, map_name, map_defaults, search_path,
 # browsable_dirs, dismount_interval and selectors_in_defaults
 # (not all of which are currently implemented, see above).
 #
@@ -406,6 +406,6 @@ dismount_interval = 300
 # master map entry and the format will be inherited for type
 # "auto" mounts.
 #
-# [ /expamle/mount ]
-# dismount_interval = 60
-# map_type = nis
+#[ /example/mount ]
+#dismount_interval = 60
+#map_type = nis
diff --git a/redhat/autofs.sysconfig b/redhat/autofs.sysconfig
index 2ca53ff..0171696 100644
--- a/redhat/autofs.sysconfig
+++ b/redhat/autofs.sysconfig
@@ -1,5 +1,5 @@
 #
-# Init syatem options
+# Init system options
 #
 # If the kernel supports using the autofs miscellanous device
 # and you wish to use it you must set this configuration option
diff --git a/samples/autofs.conf.default.in
b/samples/autofs.conf.default.in
index 7c87ba5..2d3015c 100644
--- a/samples/autofs.conf.default.in
+++ b/samples/autofs.conf.default.in
@@ -69,7 +69,7 @@ browse_mode = no
 #			are run as the privileged user this opens
 #			automount(8) to potential user privilege
 #			escalation when the program map is written
-#			in a language that  can load components from,
+#			in a language that can load components from,
 #			for example, a user home directory.
 #
 # force_standard_program_map_env = no
@@ -77,7 +77,7 @@ browse_mode = no
 # use_mount_request_log_id - Set whether to use a mount request log
 #			id so that log entries for specific mount
 #			requests can be easily identified in logs
-#			that have multiple conncurrent requests.
+#			that have multiple concurrent requests.
 #
 #use_mount_request_log_id = no
 #
@@ -114,7 +114,7 @@ browse_mode = no
 #ldap_network_timeout = 8
 #
 # search_base - base dn to use for searching for map search dn.
-# 		Multiple entries can be given and they are checked
+# 		Multiple entries can be given, and they are checked
 # 		in the order they occur here.
 #
 #search_base = ""
@@ -405,6 +405,6 @@ dismount_interval = 300
 # master map entry and the format will be inherited for type
 # "auto" mounts.
 #
-# [ /expamle/mount ]
-# dismount_interval = 60
-# map_type = nis
+#[ /example/mount ]
+#dismount_interval = 60
+#map_type = nis
-- 
2.20.1





[Index of Archives]     [Linux Filesystem Development]     [Linux Ext4]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux