On Sat, 2019-03-09 at 11:10 +0100, Andreas P wrote: > Fix typing errors of various files. I'll add this to my patch queue. I'm already behind in committing patches in the queue, I hope to get onto that soon. I can't say when this patch will get committed to the repo., only that it is in my queue and will get committed at some point. I will add "Signed-off-by: Andreas P <nurgrak@xxxxxxxxx>" to the patch as well as a title. > > --- > Makefile.conf.in | 2 +- > README.amd-maps | 4 ++-- > man/autofs.5 | 12 +++++----- > redhat/autofs.conf.default.in | 42 +++++++++++++++++----------------- > samples/autofs.conf.default.in | 20 ++++++++-------- > samples/autofs.init.conf | 2 +- > 6 files changed, 41 insertions(+), 41 deletions(-) > > diff --git a/Makefile.conf.in b/Makefile.conf.in > index ff9b18a..a1e5ead 100644 > --- a/Makefile.conf.in > +++ b/Makefile.conf.in > @@ -72,7 +72,7 @@ RANLIB = @PATH_RANLIB@ > TIRPCLIB = @TIRPC_LIBS@ > TIRPCCFLAGS = @TIRPC_CFLAGS@ > > -# Use dmalloc for memory debuging > +# Use dmalloc for memory debugging > DMALLOCLIB = @DMALLOCLIB@ > > # > diff --git a/README.amd-maps b/README.amd-maps > index c7e22c8..d933a67 100644 > --- a/README.amd-maps > +++ b/README.amd-maps > @@ -61,8 +61,8 @@ add it below the autofs configuration. Apart from changing > the amd > changed. However, quite a few amd configuration options don't have > meaning within autofs. When these options are seen they are logged. > > -Be aware that, if the an old configuration exists and the configuration > -hasn't been updated after the installation, changes to the the old > +Be aware that, if an old configuration exists and the configuration > +hasn't been updated after the installation, changes to the old > configuration will override changes to the new configuration because > backward compatibility takes priority over the new implementation. > > diff --git a/man/autofs.5 b/man/autofs.5 > index c242127..2c224e1 100644 > --- a/man/autofs.5 > +++ b/man/autofs.5 > @@ -304,32 +304,32 @@ The \fBselectors\fP that take no arguments are: > .TP > .B arch > .br > -The machine architecture which, if not set in the confugration, is > +The machine architecture which, if not set in the configuration, is > obtained using uname(2). > .TP > .B karch > .br > -The machine kernel architecture which, if not set in the confugration, > +The machine kernel architecture which, if not set in the configuration, > is obtained using uname(2). > .TP > .B os > .br > -The operating system name, if not set in the confugration, is obtained > +The operating system name, if not set in the configuration, is obtained > using uname(2). > .TP > .B osver > .br > -The operating system version, if not set in the confugration, is obtained > +The operating system version, if not set in the configuration, is obtained > using uname(2). > .TP > .B full_os > .br > -The full operating system name, if not set in the confugration this selector > +The full operating system name, if not set in the configuration this selector > has no value. > .TP > .B vendor > .br > -The operating system vendor name, if not set in the confugration this > selector > +The operating system vendor name, if not set in the configuration this > selector > has the value "unknown". > .TP > .B byte > diff --git a/redhat/autofs.conf.default.in b/redhat/autofs.conf.default.in > index a72a79f..d4010c1 100644 > --- a/redhat/autofs.conf.default.in > +++ b/redhat/autofs.conf.default.in > @@ -7,7 +7,7 @@ > # > #master_map_name = auto.master > # > -# timeout - set the default mount timeout in secons. The internal > +# timeout - set the default mount timeout in seconds. The internal > # program default is 10 minutes, but the default installed > # configuration overrides this and sets the timeout to 5 > # minutes to be consistent with earlier autofs releases. > @@ -45,13 +45,13 @@ timeout = 300 > browse_mode = no > # > # mount_nfs_default_protocol - set the default protocol that mount.nfs(8) > -# uses when performing a mount. Autofs needs > -# to know the default NFS protocol that > -# mount.nfs(8) uses so it can do special case > -# handling for its availability probe for > -# different NFS protocols. Since we can't > -# identify the default automatically we need > -# to set it in our configuration. > +# uses when performing a mount. Autofs needs > +# to know the default NFS protocol that > +# mount.nfs(8) uses so it can do special case > +# handling for its availability probe for > +# different NFS protocols. Since we can't > +# identify the default automatically we need > +# to set it in our configuration. > # > #mount_nfs_default_protocol = 3 > mount_nfs_default_protocol = 4 > @@ -65,9 +65,9 @@ mount_nfs_default_protocol = 4 > #logging = none > # > # force_standard_program_map_env - disable the use of the "AUTOFS_" > -# prefix for standard environemt variables when > +# prefix for standard environment variables when > # executing a program map. Since program maps > -# are run as the privileded user this opens > +# are run as the privileged user this opens > # automount(8) to potential user privilege > # escalation when the program map is written > # in a language that can load components from, > @@ -86,7 +86,7 @@ mount_nfs_default_protocol = 4 > # > # Define server URIs > # > -# ldap_uri - space seperated list of server uris of the form > +# ldap_uri - space separated list of server uris of the form > # <proto>://<server>[/] where <proto> can be ldap > # or ldaps. The option can be given multiple times. > # Map entries that include a server name override > @@ -105,7 +105,7 @@ mount_nfs_default_protocol = 4 > # > #ldap_uri = "" > # > -# ldap_timeout - timeout value for the synchronous API calls > +# ldap_timeout - timeout value for the synchronous API calls > # (default is LDAP library default). > # > #ldap_timeout = -1 > @@ -161,11 +161,11 @@ mount_nfs_default_protocol = 4 > #map_hash_table_size = 1024 > # > # use_hostname_for_mounts - nfs mounts where the host name resolves > -# to more than one IP address normally need > -# to use the IP address to esure a mount to > -# a host that isn't responding isn't done. > -# If that behaviour is not wanted then set > -# ths to "yes", default is "no". > +# to more than one IP address normally need > +# to use the IP address to ensure a mount to > +# a host that isn't responding isn't done. > +# If that behaviour is not wanted then set > +# ths to "yes", default is "no". > # > #use_hostname_for_mounts = "no" > # > @@ -178,7 +178,7 @@ mount_nfs_default_protocol = 4 > #disable_not_found_message = "no" > # > # sss_master_map_wait - When sssd is starting up it can sometimes return > -# "no such entry" for a short time until it has read > +# "no such entry" for a short time until it has read > # in the LDAP map information. Internal default is 0 > # seconds, don't wait but if there is a problem with > # autofs not finding the master map at startup (when > @@ -344,7 +344,7 @@ mount_nfs_default_protocol = 4 > # is translated in its official host name. > # > # domain_strip - if set to "yes" the domain name part of the host > -# is strippped when normalizing hostnames. This can be useful > +# is stripped when normalizing hostnames. This can be useful > # when using of the same maps in a multiple domain environment. > # > # normalize_slashes - is set to "yes" by default and will collapse > @@ -389,8 +389,8 @@ dismount_interval = 300 > # > # Overriding this can cause autofs to use less resources because > # it will use symlinks instead of bind mounts in certain cases. > -# You should ensure that the autofs kernel module your using > -# supports expration of symlinks for best results (although this > +# You should ensure that the autofs kernel module you are using > +# supports expiration of symlinks for best results (although this > # appears to work reasonably well most of the time without the > # update). > # > diff --git a/samples/autofs.conf.default.in b/samples/autofs.conf.default.in > index 2693a97..7c87ba5 100644 > --- a/samples/autofs.conf.default.in > +++ b/samples/autofs.conf.default.in > @@ -7,7 +7,7 @@ > # > #master_map_name = auto.master > # > -# timeout - set the default mount timeout in secons. The internal > +# timeout - set the default mount timeout in seconds. The internal > # program default is 10 minutes, but the default installed > # configuration overrides this and sets the timeout to 5 > # minutes to be consistent with earlier autofs releases. > @@ -19,7 +19,7 @@ timeout = 300 > # be read at program start (default 10, wait > # for 10 seconds then continue). > # > -# master_wait = 10 > +#master_wait = 10 > # > # negative_timeout - set the default negative timeout for > # failed mount attempts (default 60). > @@ -64,9 +64,9 @@ browse_mode = no > #logging = none > # > # force_standard_program_map_env - disable the use of the "AUTOFS_" > -# prefix for standard environemt variables when > +# prefix for standard environment variables when > # executing a program map. Since program maps > -# are run as the privileded user this opens > +# are run as the privileged user this opens > # automount(8) to potential user privilege > # escalation when the program map is written > # in a language that can load components from, > @@ -85,7 +85,7 @@ browse_mode = no > # > # Define server URIs > # > -# ldap_uri - space seperated list of server uris of the form > +# ldap_uri - space separated list of server uris of the form > # <proto>://<server>[/] where <proto> can be ldap > # or ldaps. The option can be given multiple times. > # Map entries that include a server name override > @@ -104,7 +104,7 @@ browse_mode = no > # > #ldap_uri = "" > # > -# ldap_timeout - timeout value for the synchronous API calls > +# ldap_timeout - timeout value for the synchronous API calls > # (default is LDAP library default). > # > #ldap_timeout = -1 > @@ -161,7 +161,7 @@ browse_mode = no > # > # use_hostname_for_mounts - nfs mounts where the host name resolves > # to more than one IP address normally need > -# to use the IP address to esure a mount to > +# to use the IP address to ensure a mount to > # a host that isn't responding isn't done. > # If that behaviour is not wanted then set > # ths to "yes", default is "no". > @@ -343,7 +343,7 @@ browse_mode = no > # is translated in its official host name. > # > # domain_strip - if set to "yes" the domain name part of the host > -# is strippped when normalizing hostnames. This can be useful > +# is stripped when normalizing hostnames. This can be useful > # when using of the same maps in a multiple domain environment. > # > # normalize_slashes - is set to "yes" by default and will collapse > @@ -388,8 +388,8 @@ dismount_interval = 300 > # > # Overriding this can cause autofs to use less resources because > # it will use symlinks instead of bind mounts in certain cases. > -# You should ensure that the autofs kernel module your using > -# supports expration of symlinks for best results (although this > +# You should ensure that the autofs kernel module you are using > +# supports expiration of symlinks for best results (although this > # appears to work reasonably well most of the time without the > # update). > # > diff --git a/samples/autofs.init.conf b/samples/autofs.init.conf > index 2ca53ff..0171696 100644 > --- a/samples/autofs.init.conf > +++ b/samples/autofs.init.conf > @@ -1,5 +1,5 @@ > # > -# Init syatem options > +# Init system options > # > # If the kernel supports using the autofs miscellanous device > # and you wish to use it you must set this configuration option
