On Sun, 2003-08-10 at 14:57, Jim Perrin wrote: > I recently purchased the Promise Fasttrack s150 TX4 because it was one of > the cheaper cards that boasted linux support. I'me becoming a bit irritated > with it though as it does not list any actual device in /dev/rd/* that I > can see. Has anyone succesfully set this card up with raid? I can access > the individual drives using /dev/sda etc, but what do I use to access the > raid array? Below is output from /proc in case it's needed. > > Any help would be immensely welcome. You need to define the raid in the bios of the card and build it there. After that you should see the raid as a single scsi drive. This is, if you are using the binary drivers provided by Promise. If you use the Open source drivers you should make devices in the /dev/ataraid subdirectory and your raid should appear as /dev/atatraid/d0p1 etc. For more info see the various howto documents on the web. Regards, Homme
