I'm trying the howto at the moment... But it always complains about /dev/hdf. I do not use this device... I use the /dev/sda What's wrong? > -----Original Message----- > From: ataraid-list-admin@xxxxxxxxxx > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Murty Rompalli > Sent: Monday, April 29, 2002 8:18 AM > To: ataraid-list@xxxxxxxxxx > Subject: RE: Comment about Arjan > > > Be happy then, you see your raid card. If you are trying to > use it just as IDE card without raid or trying to use raid on > non-OS disks, pass ide2 , ide3 addresses or whatever > appropriate for you.Otherwise, compile kernel with fasstract > support. See howto http://www.murty.net/promiseraid/ > > On Mon, 29 Apr 2002, Oliver Pitzeier wrote: > > > OK... Here it goes: > > [root@silo root]# cat /proc/pci > > PCI devices found: > > Bus 0, device 0, function 0: > > Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo > > PRO133x] (rev 196 ). > > Prefetchable 32 bit memory at 0xe7000000 [0xe7ffffff]. > > Bus 0, device 1, function 0: > > PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > > MVP3/Pro133x AGP] ( > > rev 0). > > Master Capable. No bursts. Min Gnt=8. > > Bus 0, device 4, function 0: > > ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile > South] (rev > > 35). > > Bus 0, device 4, function 1: > > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16). > > Master Capable. Latency=32. > > I/O at 0xb800 [0xb80f]. > > Bus 0, device 4, function 2: > > USB Controller: VIA Technologies, Inc. UHCI USB (rev 17). > > IRQ 10. > > Master Capable. Latency=32. > > I/O at 0xb400 [0xb41f]. > > Bus 0, device 4, function 3: > > Host bridge: VIA Technologies, Inc. VT82C596 Power > Management (rev > > 48). > > Bus 0, device 9, function 0: > > Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] > > (rev 116). > > IRQ 10. > > Master Capable. Latency=32. Min Gnt=10.Max Lat=10. > > I/O at 0xb000 [0xb07f]. > > Non-prefetchable 32 bit memory at 0xe4000000 [0xe400007f]. > > Bus 0, device 12, function 0: > > RAID bus controller: Promise Technology, Inc. 20267 (rev 2). > > IRQ 11. > > Master Capable. Latency=32. > > I/O at 0xa800 [0xa807]. > > I/O at 0xa400 [0xa403]. > > I/O at 0xa000 [0xa007]. > > I/O at 0x9800 [0x9803]. > > I/O at 0x9400 [0x943f]. > > Non-prefetchable 32 bit memory at 0xe3800000 [0xe381ffff]. > > Bus 0, device 14, function 0: > > Ethernet controller: 3Com Corporation 3c900B-TPO > [Etherlink XL TPO] > > (rev 4). > > IRQ 5. > > Master Capable. Latency=32. Min Gnt=10.Max Lat=48. > > I/O at 0x9000 [0x907f]. > > Non-prefetchable 32 bit memory at 0xe3000000 [0xe300007f]. > > Bus 1, device 0, function 0: > > VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev > > 101). > > IRQ 11. > > Master Capable. Latency=64. Min Gnt=8. > > Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff]. > > I/O at 0xd800 [0xd8ff]. > > Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff]. > > > > -Oliver > > > > > -----Original Message----- > > > From: ataraid-list-admin@xxxxxxxxxx > > > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Murty Rompalli > > > Sent: Monday, April 29, 2002 7:54 AM > > > To: ataraid-list@xxxxxxxxxx > > > Subject: Re: Comment about Arjan > > > > > > > > > > > > What do you see when you type: cat /proc/pci > > > You shouldnt have any problems with 2.4.18 > > > > > > On Sun, 28 Apr 2002, Arne van Belle wrote: > > > > > > > Hello Oliver and all others, > > > > > > > > Please let me warn you, not all problems are solved yet. I use > > > > 2.4.18-4G ( the Suse 8 version), it has the pdcraid 0.03beta > > > > drivers but it does not see my Raid onboard the MSI 845 > > > Ultra-ARU It > > > > uses Promise PDC20276 chipset and BIOS 2.00 Tried with one > > > disk (not > > > > really a RAID) and with two disks on RAID 0 en in RAID > 1. Whatever > > > > I try, The software raid driver tells me: no raid > > > array found > > > > W98 and W2K have no problem accessing the RAID. > > > > Suse does tells everone that it supports the Promise > > > Fasttrack, but they > > > > won't give installation support on RAID systems ! > > > > > > > > Greetings, > > > > Arne van Belle > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Ataraid-list@xxxxxxxxxx > > > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Ataraid-list@xxxxxxxxxx > > > https://listman.redhat.com/mailman/listinfo/at> araid-list > > > > > > > > > > > > > _______________________________________________ > > > > Ataraid-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/at> araid-list >
