RE: Comment about Arjan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



So is this true???

I also have a PDC20270...
Tell me! I really wanna try this now on another machine. :o)
The Howto looks quite fine!

> -----Original Message-----
> From: ataraid-list-admin@xxxxxxxxxx 
> [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Juraj
> Sent: Monday, April 29, 2002 10:00 AM
> To: ataraid-list@xxxxxxxxxx
> Subject: RE: Comment about Arjan
> 
> 
> It doesn't look like setup you have mentioned before. If you 
> really have 
> pdc20276, you are out of luck - it's not yet supported. I've 
> the same problem.
> 
> Martin
> 
> At 09:23 29.4.2002 +0200, you wrote:
> >OK... Here it goes:
> >[root@silo root]# cat /proc/pci
> >PCI devices found:
> >   Bus  0, device   0, function  0:
> >     Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo 
> >PRO133x] (rev 196 ).
> >       Prefetchable 32 bit memory at 0xe7000000 [0xe7ffffff].
> >   Bus  0, device   1, function  0:
> >     PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
> >MVP3/Pro133x AGP] (
> >rev 0).
> >       Master Capable.  No bursts.  Min Gnt=8.
> >   Bus  0, device   4, function  0:
> >     ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile 
> South] (rev
> >35).
> >   Bus  0, device   4, function  1:
> >     IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16).
> >       Master Capable.  Latency=32.
> >       I/O at 0xb800 [0xb80f].
> >   Bus  0, device   4, function  2:
> >     USB Controller: VIA Technologies, Inc. UHCI USB (rev 17).
> >       IRQ 10.
> >       Master Capable.  Latency=32.
> >       I/O at 0xb400 [0xb41f].
> >   Bus  0, device   4, function  3:
> >     Host bridge: VIA Technologies, Inc. VT82C596 Power 
> Management (rev
> >48).
> >   Bus  0, device   9, function  0:
> >     Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
> >(rev 116).
> >       IRQ 10.
> >       Master Capable.  Latency=32.  Min Gnt=10.Max Lat=10.
> >       I/O at 0xb000 [0xb07f].
> >       Non-prefetchable 32 bit memory at 0xe4000000 [0xe400007f].
> >   Bus  0, device  12, function  0:
> >     RAID bus controller: Promise Technology, Inc. 20267 (rev 2).
> >       IRQ 11.
> >       Master Capable.  Latency=32.
> >       I/O at 0xa800 [0xa807].
> >       I/O at 0xa400 [0xa403].
> >       I/O at 0xa000 [0xa007].
> >       I/O at 0x9800 [0x9803].
> >       I/O at 0x9400 [0x943f].
> >       Non-prefetchable 32 bit memory at 0xe3800000 [0xe381ffff].
> >   Bus  0, device  14, function  0:
> >     Ethernet controller: 3Com Corporation 3c900B-TPO 
> [Etherlink XL TPO]
> >(rev 4).
> >       IRQ 5.
> >       Master Capable.  Latency=32.  Min Gnt=10.Max Lat=48.
> >       I/O at 0x9000 [0x907f].
> >       Non-prefetchable 32 bit memory at 0xe3000000 [0xe300007f].
> >   Bus  1, device   0, function  0:
> >     VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev
> >101).
> >       IRQ 11.
> >       Master Capable.  Latency=64.  Min Gnt=8.
> >       Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff].
> >       I/O at 0xd800 [0xd8ff].
> >       Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff].
> >
> >-Oliver
> >
> > > -----Original Message-----
> > > From: ataraid-list-admin@xxxxxxxxxx 
> > > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Murty Rompalli
> > > Sent: Monday, April 29, 2002 7:54 AM
> > > To: ataraid-list@xxxxxxxxxx
> > > Subject: Re: Comment about Arjan
> > >
> > >
> > >
> > > What do you see when you type: cat /proc/pci
> > > You shouldnt have any problems with 2.4.18
> > >
> > > On Sun, 28 Apr 2002, Arne van Belle wrote:
> > >
> > > > Hello Oliver and all others,
> > > >
> > > > Please let me warn you, not all problems are solved yet. I use 
> > > > 2.4.18-4G ( the Suse 8 version), it has the pdcraid 0.03beta 
> > > > drivers but it does not see my Raid onboard the MSI 845
> > > Ultra-ARU It
> > > > uses Promise PDC20276 chipset and BIOS 2.00 Tried with one
> > > disk (not
> > > > really a RAID) and with two disks on RAID 0 en in RAID 
> 1. Whatever 
> > > > I try,  The software raid driver tells me: no raid
> > > array found
> > > > W98 and W2K have no problem accessing the RAID.
> > > > Suse does tells everone that it supports the Promise
> > > Fasttrack, but they
> > > > won't give installation support on RAID systems !
> > > >
> > > > Greetings,
> > > > Arne van Belle
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > 
> > > > Ataraid-list@xxxxxxxxxx 
> > > > https://listman.redhat.com/mailman/listinfo/ataraid-list
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > 
> > > Ataraid-list@xxxxxxxxxx 
> > > https://listman.redhat.com/mailman/listinfo/at> araid-list
> > >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Ataraid-list@xxxxxxxxxx 
> >https://listman.redhat.com/mailman/listinfo/ataraid-list
> 
> 
> 
> _______________________________________________
> 
> Ataraid-list@xxxxxxxxxx 
> https://listman.redhat.com/mailman/listinfo/at> araid-list
> 






[Index of Archives]     [Linux RAID]     [Linux Device Mapper]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Yosemite Campgrounds]     [AMD 64]

  Powered by Linux