Hi Try installing and see if it works, please use 2.4.19-pre latest kernel instead of 2.4.18. Let me know if it works Thanks Murty On Mon, 29 Apr 2002, Oliver Pitzeier wrote: > So is this true??? > > I also have a PDC20270... > Tell me! I really wanna try this now on another machine. :o) > The Howto looks quite fine! > > > -----Original Message----- > > From: ataraid-list-admin@xxxxxxxxxx > > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Juraj > > Sent: Monday, April 29, 2002 10:00 AM > > To: ataraid-list@xxxxxxxxxx > > Subject: RE: Comment about Arjan > > > > > > It doesn't look like setup you have mentioned before. If you > > really have > > pdc20276, you are out of luck - it's not yet supported. I've > > the same problem. > > > > Martin > > > > At 09:23 29.4.2002 +0200, you wrote: > > >OK... Here it goes: > > >[root@silo root]# cat /proc/pci > > >PCI devices found: > > > Bus 0, device 0, function 0: > > > Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo > > >PRO133x] (rev 196 ). > > > Prefetchable 32 bit memory at 0xe7000000 [0xe7ffffff]. > > > Bus 0, device 1, function 0: > > > PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > > >MVP3/Pro133x AGP] ( > > >rev 0). > > > Master Capable. No bursts. Min Gnt=8. > > > Bus 0, device 4, function 0: > > > ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile > > South] (rev > > >35). > > > Bus 0, device 4, function 1: > > > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16). > > > Master Capable. Latency=32. > > > I/O at 0xb800 [0xb80f]. > > > Bus 0, device 4, function 2: > > > USB Controller: VIA Technologies, Inc. UHCI USB (rev 17). > > > IRQ 10. > > > Master Capable. Latency=32. > > > I/O at 0xb400 [0xb41f]. > > > Bus 0, device 4, function 3: > > > Host bridge: VIA Technologies, Inc. VT82C596 Power > > Management (rev > > >48). > > > Bus 0, device 9, function 0: > > > Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] > > >(rev 116). > > > IRQ 10. > > > Master Capable. Latency=32. Min Gnt=10.Max Lat=10. > > > I/O at 0xb000 [0xb07f]. > > > Non-prefetchable 32 bit memory at 0xe4000000 [0xe400007f]. > > > Bus 0, device 12, function 0: > > > RAID bus controller: Promise Technology, Inc. 20267 (rev 2). > > > IRQ 11. > > > Master Capable. Latency=32. > > > I/O at 0xa800 [0xa807]. > > > I/O at 0xa400 [0xa403]. > > > I/O at 0xa000 [0xa007]. > > > I/O at 0x9800 [0x9803]. > > > I/O at 0x9400 [0x943f]. > > > Non-prefetchable 32 bit memory at 0xe3800000 [0xe381ffff]. > > > Bus 0, device 14, function 0: > > > Ethernet controller: 3Com Corporation 3c900B-TPO > > [Etherlink XL TPO] > > >(rev 4). > > > IRQ 5. > > > Master Capable. Latency=32. Min Gnt=10.Max Lat=48. > > > I/O at 0x9000 [0x907f]. > > > Non-prefetchable 32 bit memory at 0xe3000000 [0xe300007f]. > > > Bus 1, device 0, function 0: > > > VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev > > >101). > > > IRQ 11. > > > Master Capable. Latency=64. Min Gnt=8. > > > Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff]. > > > I/O at 0xd800 [0xd8ff]. > > > Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff]. > > > > > >-Oliver > > > > > > > -----Original Message----- > > > > From: ataraid-list-admin@xxxxxxxxxx > > > > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Murty Rompalli > > > > Sent: Monday, April 29, 2002 7:54 AM > > > > To: ataraid-list@xxxxxxxxxx > > > > Subject: Re: Comment about Arjan > > > > > > > > > > > > > > > > What do you see when you type: cat /proc/pci > > > > You shouldnt have any problems with 2.4.18 > > > > > > > > On Sun, 28 Apr 2002, Arne van Belle wrote: > > > > > > > > > Hello Oliver and all others, > > > > > > > > > > Please let me warn you, not all problems are solved yet. I use > > > > > 2.4.18-4G ( the Suse 8 version), it has the pdcraid 0.03beta > > > > > drivers but it does not see my Raid onboard the MSI 845 > > > > Ultra-ARU It > > > > > uses Promise PDC20276 chipset and BIOS 2.00 Tried with one > > > > disk (not > > > > > really a RAID) and with two disks on RAID 0 en in RAID > > 1. Whatever > > > > > I try, The software raid driver tells me: no raid > > > > array found > > > > > W98 and W2K have no problem accessing the RAID. > > > > > Suse does tells everone that it supports the Promise > > > > Fasttrack, but they > > > > > won't give installation support on RAID systems ! > > > > > > > > > > Greetings, > > > > > Arne van Belle > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > Ataraid-list@xxxxxxxxxx > > > > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Ataraid-list@xxxxxxxxxx > > > > https://listman.redhat.com/mailman/listinfo/at> araid-list > > > > > > > > > > > > > > > > > > >_______________________________________________ > > > > > >Ataraid-list@xxxxxxxxxx > > >https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > > > _______________________________________________ > > > > Ataraid-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/at> araid-list > > > > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list >
