Be happy then, you see your raid card. If you are trying to use it just as IDE card without raid or trying to use raid on non-OS disks, pass ide2 , ide3 addresses or whatever appropriate for you.Otherwise, compile kernel with fasstract support. See howto http://www.murty.net/promiseraid/ On Mon, 29 Apr 2002, Oliver Pitzeier wrote: > OK... Here it goes: > [root@silo root]# cat /proc/pci > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] > (rev 196 > ). > Prefetchable 32 bit memory at 0xe7000000 [0xe7ffffff]. > Bus 0, device 1, function 0: > PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > MVP3/Pro133x AGP] ( > rev 0). > Master Capable. No bursts. Min Gnt=8. > Bus 0, device 4, function 0: > ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev > 35). > Bus 0, device 4, function 1: > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16). > Master Capable. Latency=32. > I/O at 0xb800 [0xb80f]. > Bus 0, device 4, function 2: > USB Controller: VIA Technologies, Inc. UHCI USB (rev 17). > IRQ 10. > Master Capable. Latency=32. > I/O at 0xb400 [0xb41f]. > Bus 0, device 4, function 3: > Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev > 48). > Bus 0, device 9, function 0: > Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] > (rev 116). > IRQ 10. > Master Capable. Latency=32. Min Gnt=10.Max Lat=10. > I/O at 0xb000 [0xb07f]. > Non-prefetchable 32 bit memory at 0xe4000000 [0xe400007f]. > Bus 0, device 12, function 0: > RAID bus controller: Promise Technology, Inc. 20267 (rev 2). > IRQ 11. > Master Capable. Latency=32. > I/O at 0xa800 [0xa807]. > I/O at 0xa400 [0xa403]. > I/O at 0xa000 [0xa007]. > I/O at 0x9800 [0x9803]. > I/O at 0x9400 [0x943f]. > Non-prefetchable 32 bit memory at 0xe3800000 [0xe381ffff]. > Bus 0, device 14, function 0: > Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] > (rev 4). > IRQ 5. > Master Capable. Latency=32. Min Gnt=10.Max Lat=48. > I/O at 0x9000 [0x907f]. > Non-prefetchable 32 bit memory at 0xe3000000 [0xe300007f]. > Bus 1, device 0, function 0: > VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev > 101). > IRQ 11. > Master Capable. Latency=64. Min Gnt=8. > Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff]. > I/O at 0xd800 [0xd8ff]. > Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff]. > > -Oliver > > > -----Original Message----- > > From: ataraid-list-admin@xxxxxxxxxx > > [mailto:ataraid-list-admin@xxxxxxxxxx] On Behalf Of Murty Rompalli > > Sent: Monday, April 29, 2002 7:54 AM > > To: ataraid-list@xxxxxxxxxx > > Subject: Re: Comment about Arjan > > > > > > > > What do you see when you type: cat /proc/pci > > You shouldnt have any problems with 2.4.18 > > > > On Sun, 28 Apr 2002, Arne van Belle wrote: > > > > > Hello Oliver and all others, > > > > > > Please let me warn you, not all problems are solved yet. > > > I use 2.4.18-4G ( the Suse 8 version), it has the pdcraid 0.03beta > > > drivers but it does not see my Raid onboard the MSI 845 > > Ultra-ARU It > > > uses Promise PDC20276 chipset and BIOS 2.00 Tried with one > > disk (not > > > really a RAID) and with two disks on RAID 0 en in RAID 1. > > > Whatever I try, The software raid driver tells me: no raid > > array found > > > W98 and W2K have no problem accessing the RAID. > > > Suse does tells everone that it supports the Promise > > Fasttrack, but they > > > won't give installation support on RAID systems ! > > > > > > Greetings, > > > Arne van Belle > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Ataraid-list@xxxxxxxxxx > > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > > > > > > _______________________________________________ > > > > Ataraid-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/at> araid-list > > > > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list >
