I feel stupid now. It's a SX6000 controller with 5 drives and I have been trying to follow some newsgroup threads. So am I correct here thinking that I cannot use the ataraid drivers on the SX6000? What drivers do I need? Anyone with experience on the sx6000? Thanks for the info -----Original Message----- From: Forge XP [mailto:forge@xxxxxxx] Sent: Friday, January 11, 2002 3:55 PM To: ataraid-list@xxxxxxxxxx Subject: Re: No Array found The SX6000 and the ataraid driver have precisely zero to do with each other. The SX6000 is an I2O device, IIRC. (Might be a different three letter acronym.) The ataraid driver deals with Promise PDC202** based IDE RAID controllers and Highpoint HPT-3** RAID controllers only. The SX6000 and the other Supertraks are hardware RAID devices, handled by a different driver. > My SX6000 is running bios 1.10.0 build10. if that make a difference. > > John Burton wrote: > > > > Arjan van de Ven wrote: > > > > > On Thu, Jan 10, 2002 at 03:50:50PM -0700, Dave Packham wrote: > > > > > >> I have a 400gig array defined as raid 0 in the bios and after > > >> installing > > >> Mandrake 8.1 I am getting the "No array found" message. As a > > >> module > > >> ataraid.o is ok, but insmod pdcraid.o writes out: prcraid.o: > > >> init_module: No such device > > >> > > > what driver letters are this ? (eg hde/hdf ?) > > > > > Ummm... /dev/hde and /dev/hdf maybe??? hde and hdf are master and > > slave drives (respectively) on the first channel of the first > > "offboard" IDE controller > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list > > _______________________________________________ Ataraid-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/ataraid-list
