I dont see any reference to any other driver than the boot volumes
I have 2 30 gig drivers hda/hdb that I installed Linux on. I have
included my dmesg for you to check out
Arjan van de Ven wrote:
>
> On Thu, Jan 10, 2002 at 03:50:50PM -0700, Dave Packham wrote:
> > I have a 400gig array defined as raid 0 in the bios and after installing
> > Mandrake 8.1 I am getting the "No array found" message. As a module
> > ataraid.o is ok, but insmod pdcraid.o writes out: prcraid.o:
> > init_module: No such device
>
> what driver letters are this ? (eg hde/hdf ?)
>
> _______________________________________________
>
> Ataraid-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/ataraid-list
U: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3991.14 BogoMIPS).
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 4 ... ok.
...changing IO-APIC physical APIC ID to 5 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 4-0, 4-5, 4-9, 4-11, 5-1, 5-2, 5-3, 5-6, 5-7, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 20.
number of IO-APIC #4 registers: 16.
number of IO-APIC #5 registers: 16.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 003 03 1 1 0 1 0 1 1 69
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 71
0d 003 03 0 0 0 0 0 1 1 79
0e 003 03 0 0 0 0 0 1 1 81
0f 003 03 0 0 0 0 0 1 1 89
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 01000000
....... : arbitration: 01
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 91
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 99
05 003 03 1 1 0 1 0 1 1 A1
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 003 03 1 1 0 1 0 1 1 A9
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 003 03 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ20 -> 1:4
IRQ21 -> 1:5
IRQ24 -> 1:8
IRQ31 -> 1:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.5494 MHz.
..... host bus clock speed is 133.2731 MHz.
cpu: 0, clocks: 1332731, slice: 444243
CPU0<T0:1332720,T1:888464,D:13,S:444243,C:1332731>
cpu: 1, clocks: 1332731, slice: 444243
CPU1<T0:1332720,T1:444224,D:10,S:444243,C:1332731>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfdbb1, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0
PCI->APIC IRQ transform: (B0,I1,P0) -> 16
PCI->APIC IRQ transform: (B0,I3,P0) -> 20
PCI->APIC IRQ transform: (B0,I6,P0) -> 31
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B2,I1,P0) -> 24
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00f4ce0
PnP: PNP BIOS version 1.0, entry at f0000:3b44, dseg at f0000
PnPBIOS: PNP0c02: request 0x4d0-0x4d2 ok
PnPBIOS: PNP0c02: request 0xcf8-0xd00
PnPBIOS: PNP0c02: request 0x40b-0x40c ok
PnPBIOS: PNP0c02: request 0x4d6-0x4d7 ok
PnPBIOS: PNP0c02: request 0xc00-0xc02 ok
PnPBIOS: PNP0c02: request 0xc14-0xc15 ok
PnPBIOS: PNP0c02: request 0xc49-0xc4b ok
PnPBIOS: PNP0c02: request 0xc52-0xc53 ok
PnPBIOS: PNP0c02: request 0xc6c-0xc6d ok
PnPBIOS: PNP0c02: request 0xc6f-0xc70 ok
PnPBIOS: PNP0c02: request 0xcd6-0xcd8 ok
PnPBIOS: PNP0c02: request 0xf50-0xf59 ok
PnPBIOS: PNP0c02: request 0x374-0x376 ok
PnPBIOS: PNP0c02: request 0x377-0x378 ok
PnPBIOS: PNP0c02: request 0x580-0x590 ok
PnPBIOS: PNP0c02: request 0x530-0x532 ok
PnPBIOS: PNP0c02: request 0x540-0x560 ok
PnPBIOS: PNP0c02: request 0x500-0x520 ok
PnPBIOS: PNP0c02: request 0xc98-0xc99 ok
PnP: 15 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
apm: disabled - APM is not SMP safe.
Starting kswapd v1.8
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf8000000, mapped to 0xf8800000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:5b6a
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 2630722kB/2499650kB, 7744 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 5T030H3, ATA DISK drive
hdb: Maxtor 5T030H3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(33)
hdb: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
/dev/ide/host0/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 107k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 248k freed
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48496 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48496 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
Real Time Clock Driver v1.10d
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6005: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6005: writing inode 48496 on readonly FS
clm-6005: writing inode 48495 on readonly FS
Adding Swap: 784876k swap-space (priority -1)
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6006: writing inode 48495 on readonly FS
clm-6005: writing inode 48495 on readonly FS
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:41) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:30:48:21:73:33, I/O at 0xd800, IRQ 31.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
sk98lin: Network Device Driver v4.06
Copyright (C) 2000-2001 SysKonnect GmbH.
eth1: SysKonnect SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
PrefPort:A RlmtMode:Check Link State
mtrr: your processor doesn't support write-combining
