Hi Norbert, > > Well, I have two spare disks on a hpt270, so lets try. Raid0 is working > not too bad, I copied big amounts of files etc and had no problems > till now. Ok, as the code is at home, I'll ask my wife to fw it for you. The code seems to be messed up somewhere. When I tried, 1. reported no raid0 . This is ok. 2. Found a raid1 array w/ 2 disks, This is ok. 3. Found no raid1 array.... why ohh why Finally I got an ataraid device, which has the right partition table, I could mount it, read it, but the writing messed up the whole thing. Somehow the second device is not mapped to the array. But in this case why reported the raid1 array w/ 2 disks in the second run??? There is a double do-while loop in the init part, this should be cleaned. And I found that there is an ID (the hpt370.o binary module can set this) for the array somewhere, so this should be used in (maybe) the probedisk method. Tib -- ------------------------------------- Ezt a mondatot nem lehet bizonyítani. -------------------------------------
