You?re messing up with channels and CIC?s. This is an example: /etc/dahdi/system.conf (for ITU, you must adapt it for ANSI) # Spans and signaling span=1,1,0,ccs,hdb3 span=2,0,0,ccs,hdb3 # E1 = 1 on signaling SS7 bchan=1-15 mtp2=16 bchan=17-31 # E1 = 2 on signaling SS7 bchan=32-46 mtp2=47 bchan=48-62 In chan_dahdi.conf you must define linksets, link(s) and CICs for that linkset. Do you need some example for that? > On Jan 11, 2016, at 6:13 PM, Jean C?rien <cerien.jean at gmail.com> wrote: > > > Hi, thanks for the help > > Unfortunately, it does not really work - and somehow it seems logical to me - there is one adapter, and channels are numbered from 1 to 62, and either dahdi_cfg or asterisk complains if the same cic numbers appear twice > > the following does not work: > > span=1,1,0,ccs,hdb3,crc4 > # termtype: te > bchan=2-31 > dchan=1 > echocanceller=mg2,2-31 > > > # Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" > span=2,0,0,ccs,hdb3,crc4 > # termtype: nt > bchan=2-31 > dchan=1 > echocanceller=mg2,2-31 > > > On Mon, Jan 11, 2016 at 5:00 PM, Gustavo Marsico <gustavomarsico at gmail.com <mailto:gustavomarsico at gmail.com>> wrote: > If you?re bringing up a loopback between 2 ports on the same system, the CIC?s must have the same numbering on both linksets. > > > > On Jan 11, 2016, at 5:53 PM, Jean C?rien <cerien.jean at gmail.com <mailto:cerien.jean at gmail.com>> wrote: > > > > > > Hello > > > > I am building a new production server, and I am in the test phase. > > Server has a te235 digium card, and > > dahdi-linux-complete-2.11.0+2.11.0 > > libss7-2.0.0 > > asterisk-13.6.0 > > libpri-1.4.15 > > > > I am currently configuring in loopback the two ports, with a cross cable - I've been successfull in isdn, now testing ss7 (final objective). > > > > I'm in E1/ansi, linkset 1 has signalliing channel 1, cic 2-31, and linkset 2 has signalling channel 32, cic 33-62 > > > > I think I'm nearly there, but when I start asterisk, I get a serie of messages "sig_ss7.c:1600 ss7_linkset: GRS on unconfigured range CIC <xx> - <yy> PC [1 or 2]" - ss7 show channels shows idle=no for all (see below). > > > > Yet, the two spans are declared - I understand this setup is possible, what could be wrong ? > > > > Any help would be appreciated, > > > > Rgds > > J. > > > > system.conf > > span=1,1,0,ccs,hdb3,crc4 > > # termtype: te > > bchan=2-31 > > dchan=1 > > echocanceller=mg2,2-31 > > > > > > # Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" > > span=2,0,0,ccs,hdb3,crc4 > > # termtype: nt > > bchan=33-62 > > dchan=32 > > echocanceller=mg2,33-62 > > > > > > chan_dahdi.conf > > [trunkgroups] > > > > [channels] > > > > usecallerid=yes > > callwaiting=yes > > usecallingpres=yes > > callwaitingcallerid=yes > > threewaycalling=yes > > transfer=yes > > canpark=yes > > cancallforward=yes > > callreturn=yes > > echocancel=yes > > echocancelwhenbridged=yes > > > > > > networkindicator=national > > signalling=ss7 > > ss7type=ansi > > context=incoming-dahdi > > > > group=1 > > linkset=1 > > pointcode=1 > > adjpointcode=2 > > defaultdpc=2 > > cicbeginswith=2 > > channel=2-31 > > sigchan=1 > > > > > > > > group=2 > > linkset=2 > > pointcode=2 > > adjpointcode=1 > > defaultdpc=1 > > cicbeginswith=33 > > channel=33-62 > > sigchan=32 > > > > > > ss7 show channels > > link Chan Lcl Rem Call SS7 Channel > > set Chan Idle Blk Blk Level Call Name > > 1 2 No No No Idle Yes > > 1 3 No No No Idle No > > 1 4 No No No Idle No > > 1 5 No No No Idle No > > 1 6 No No No Idle No > > 1 7 No No No Idle No > > 1 8 No No No Idle No > > 1 9 No No No Idle No > > 1 10 No No No Idle No > > 1 11 No No No Idle No > > 1 12 No No No Idle No > > 1 13 No No No Idle No > > 1 14 No No No Idle No > > 1 15 No No No Idle No > > 1 16 No No No Idle No > > 1 17 No No No Idle No > > 1 18 No No No Idle No > > 1 19 No No No Idle No > > 1 20 No No No Idle No > > 1 21 No No No Idle No > > 1 22 No No No Idle No > > 1 23 No No No Idle No > > 1 24 No No No Idle No > > 1 25 No No No Idle No > > 1 26 No No No Idle No > > 1 27 No No No Idle Yes > > 1 28 No No No Idle No > > 1 29 No No No Idle No > > 1 30 No No No Idle No > > 1 31 No No No Idle No > > 2 33 No No No Idle Yes > > 2 34 No No No Idle No > > 2 35 No No No Idle No > > 2 36 No No No Idle No > > 2 37 No No No Idle No > > 2 38 No No No Idle No > > 2 39 No No No Idle No > > 2 40 No No No Idle No > > 2 41 No No No Idle No > > 2 42 No No No Idle No > > 2 43 No No No Idle No > > 2 44 No No No Idle No > > 2 45 No No No Idle No > > 2 46 No No No Idle No > > 2 47 No No No Idle No > > 2 48 No No No Idle No > > 2 49 No No No Idle No > > 2 50 No No No Idle No > > 2 51 No No No Idle No > > 2 52 No No No Idle No > > 2 53 No No No Idle No > > 2 54 No No No Idle No > > 2 55 No No No Idle No > > 2 56 No No No Idle No > > 2 57 No No No Idle No > > 2 58 No No No Idle Yes > > 2 59 No No No Idle No > > 2 60 No No No Idle No > > 2 61 No No No Idle No > > 2 62 No No No Idle No > > *CLI> ss7 show channels > > link Chan Lcl Rem Call SS7 Channel > > set Chan Idle Blk Blk Level Call Name > > 1 2 No No No Idle Yes > > 1 3 No No No Idle No > > 1 4 No No No Idle No > > 1 5 No No No Idle No > > 1 6 No No No Idle No > > 1 7 No No No Idle No > > 1 8 No No No Idle No > > 1 9 No No No Idle No > > 1 10 No No No Idle No > > 1 11 No No No Idle No > > 1 12 No No No Idle No > > 1 13 No No No Idle No > > 1 14 No No No Idle No > > 1 15 No No No Idle No > > 1 16 No No No Idle No > > 1 17 No No No Idle No > > 1 18 No No No Idle No > > 1 19 No No No Idle No > > 1 20 No No No Idle No > > 1 21 No No No Idle No > > 1 22 No No No Idle No > > 1 23 No No No Idle No > > 1 24 No No No Idle No > > 1 25 No No No Idle No > > 1 26 No No No Idle No > > 1 27 No No No Idle Yes > > 1 28 No No No Idle No > > 1 29 No No No Idle No > > 1 30 No No No Idle No > > 1 31 No No No Idle No > > 2 33 No No No Idle Yes > > 2 34 No No No Idle No > > 2 35 No No No Idle No > > 2 36 No No No Idle No > > 2 37 No No No Idle No > > 2 38 No No No Idle No > > 2 39 No No No Idle No > > 2 40 No No No Idle No > > 2 41 No No No Idle No > > 2 42 No No No Idle No > > 2 43 No No No Idle No > > 2 44 No No No Idle No > > 2 45 No No No Idle No > > 2 46 No No No Idle No > > 2 47 No No No Idle No > > 2 48 No No No Idle No > > 2 49 No No No Idle No > > 2 50 No No No Idle No > > 2 51 No No No Idle No > > 2 52 No No No Idle No > > 2 53 No No No Idle No > > 2 54 No No No Idle No > > 2 55 No No No Idle No > > 2 56 No No No Idle No > > 2 57 No No No Idle No > > 2 58 No No No Idle Yes > > 2 59 No No No Idle No > > 2 60 No No No Idle No > > 2 61 No No No Idle No > > 2 62 No No No Idle No > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 <http://lists.digium.com/mailman/listinfo/asterisk-ss7> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com <http://www.api-digital.com/> -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 <http://lists.digium.com/mailman/listinfo/asterisk-ss7> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160111/13f173d4/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4127 bytes Desc: not available URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160111/13f173d4/attachment-0001.bin>
|