If you?re bringing up a loopback between 2 ports on the same system, the CIC?s must have the same numbering on both linksets. > On Jan 11, 2016, at 5:53 PM, Jean C?rien <cerien.jean at gmail.com> wrote: > > > Hello > > I am building a new production server, and I am in the test phase. > Server has a te235 digium card, and > dahdi-linux-complete-2.11.0+2.11.0 > libss7-2.0.0 > asterisk-13.6.0 > libpri-1.4.15 > > I am currently configuring in loopback the two ports, with a cross cable - I've been successfull in isdn, now testing ss7 (final objective). > > I'm in E1/ansi, linkset 1 has signalliing channel 1, cic 2-31, and linkset 2 has signalling channel 32, cic 33-62 > > I think I'm nearly there, but when I start asterisk, I get a serie of messages "sig_ss7.c:1600 ss7_linkset: GRS on unconfigured range CIC <xx> - <yy> PC [1 or 2]" - ss7 show channels shows idle=no for all (see below). > > Yet, the two spans are declared - I understand this setup is possible, what could be wrong ? > > Any help would be appreciated, > > Rgds > J. > > system.conf > span=1,1,0,ccs,hdb3,crc4 > # termtype: te > bchan=2-31 > dchan=1 > echocanceller=mg2,2-31 > > > # Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" > span=2,0,0,ccs,hdb3,crc4 > # termtype: nt > bchan=33-62 > dchan=32 > echocanceller=mg2,33-62 > > > chan_dahdi.conf > [trunkgroups] > > [channels] > > usecallerid=yes > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > > > networkindicator=national > signalling=ss7 > ss7type=ansi > context=incoming-dahdi > > group=1 > linkset=1 > pointcode=1 > adjpointcode=2 > defaultdpc=2 > cicbeginswith=2 > channel=2-31 > sigchan=1 > > > > group=2 > linkset=2 > pointcode=2 > adjpointcode=1 > defaultdpc=1 > cicbeginswith=33 > channel=33-62 > sigchan=32 > > > ss7 show channels > link Chan Lcl Rem Call SS7 Channel > set Chan Idle Blk Blk Level Call Name > 1 2 No No No Idle Yes > 1 3 No No No Idle No > 1 4 No No No Idle No > 1 5 No No No Idle No > 1 6 No No No Idle No > 1 7 No No No Idle No > 1 8 No No No Idle No > 1 9 No No No Idle No > 1 10 No No No Idle No > 1 11 No No No Idle No > 1 12 No No No Idle No > 1 13 No No No Idle No > 1 14 No No No Idle No > 1 15 No No No Idle No > 1 16 No No No Idle No > 1 17 No No No Idle No > 1 18 No No No Idle No > 1 19 No No No Idle No > 1 20 No No No Idle No > 1 21 No No No Idle No > 1 22 No No No Idle No > 1 23 No No No Idle No > 1 24 No No No Idle No > 1 25 No No No Idle No > 1 26 No No No Idle No > 1 27 No No No Idle Yes > 1 28 No No No Idle No > 1 29 No No No Idle No > 1 30 No No No Idle No > 1 31 No No No Idle No > 2 33 No No No Idle Yes > 2 34 No No No Idle No > 2 35 No No No Idle No > 2 36 No No No Idle No > 2 37 No No No Idle No > 2 38 No No No Idle No > 2 39 No No No Idle No > 2 40 No No No Idle No > 2 41 No No No Idle No > 2 42 No No No Idle No > 2 43 No No No Idle No > 2 44 No No No Idle No > 2 45 No No No Idle No > 2 46 No No No Idle No > 2 47 No No No Idle No > 2 48 No No No Idle No > 2 49 No No No Idle No > 2 50 No No No Idle No > 2 51 No No No Idle No > 2 52 No No No Idle No > 2 53 No No No Idle No > 2 54 No No No Idle No > 2 55 No No No Idle No > 2 56 No No No Idle No > 2 57 No No No Idle No > 2 58 No No No Idle Yes > 2 59 No No No Idle No > 2 60 No No No Idle No > 2 61 No No No Idle No > 2 62 No No No Idle No > *CLI> ss7 show channels > link Chan Lcl Rem Call SS7 Channel > set Chan Idle Blk Blk Level Call Name > 1 2 No No No Idle Yes > 1 3 No No No Idle No > 1 4 No No No Idle No > 1 5 No No No Idle No > 1 6 No No No Idle No > 1 7 No No No Idle No > 1 8 No No No Idle No > 1 9 No No No Idle No > 1 10 No No No Idle No > 1 11 No No No Idle No > 1 12 No No No Idle No > 1 13 No No No Idle No > 1 14 No No No Idle No > 1 15 No No No Idle No > 1 16 No No No Idle No > 1 17 No No No Idle No > 1 18 No No No Idle No > 1 19 No No No Idle No > 1 20 No No No Idle No > 1 21 No No No Idle No > 1 22 No No No Idle No > 1 23 No No No Idle No > 1 24 No No No Idle No > 1 25 No No No Idle No > 1 26 No No No Idle No > 1 27 No No No Idle Yes > 1 28 No No No Idle No > 1 29 No No No Idle No > 1 30 No No No Idle No > 1 31 No No No Idle No > 2 33 No No No Idle Yes > 2 34 No No No Idle No > 2 35 No No No Idle No > 2 36 No No No Idle No > 2 37 No No No Idle No > 2 38 No No No Idle No > 2 39 No No No Idle No > 2 40 No No No Idle No > 2 41 No No No Idle No > 2 42 No No No Idle No > 2 43 No No No Idle No > 2 44 No No No Idle No > 2 45 No No No Idle No > 2 46 No No No Idle No > 2 47 No No No Idle No > 2 48 No No No Idle No > 2 49 No No No Idle No > 2 50 No No No Idle No > 2 51 No No No Idle No > 2 52 No No No Idle No > 2 53 No No No Idle No > 2 54 No No No Idle No > 2 55 No No No Idle No > 2 56 No No No Idle No > 2 57 No No No Idle No > 2 58 No No No Idle Yes > 2 59 No No No Idle No > 2 60 No No No Idle No > 2 61 No No No Idle No > 2 62 No No No Idle No > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4127 bytes Desc: not available URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20160111/bbd05075/attachment-0001.bin>
|