Try Set(CALLERPRES()=allowed)
On 17.11.2010 ?. 22:13 ?., dave george wrote:
>
> We did the following in the dialplan
>
> exten => _473.,1,SetCallerPres(allowed)
>
> exten => _473.,n,Dial(DAHDI/g1/${EXTEN},60,b)
>
> exten => _473.,n,Hangup
>
> Thanks,
>
> Dave
>
> *From:*asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] *On Behalf Of *Tuan Le
> *Sent:* Wednesday, November 17, 2010 2:53 PM
> *To:* asterisk-ss7 at lists.digium.com
> *Subject:* Re: [asterisk-ss7] SS7 Whitebook?
>
> Dave,
>
> Can you let me know where precisely how you set this to 3 so I know
> for future reference if I come across this? Thanks!!
>
> On Wed, Nov 17, 2010 at 2:37 PM, dave george <dgeorge at teletoneinc.com
> <mailto:dgeorge at teletoneinc.com>> wrote:
>
> We set the screening indicator to 3 and that seems to solve the problem.
>
> Thanks,
>
> Dave
>
> *From:*asterisk-ss7-bounces at lists.digium.com
> <mailto:asterisk-ss7-bounces at lists.digium.com>
> [mailto:asterisk-ss7-bounces at lists.digium.com
> <mailto:asterisk-ss7-bounces at lists.digium.com>] *On Behalf Of *Jan Berger
> *Sent:* Wednesday, November 17, 2010 1:41 PM
>
>
> *To:* asterisk-ss7 at lists.digium.com <mailto:asterisk-ss7 at lists.digium.com>
> *Subject:* Re: [asterisk-ss7] SS7 Whitebook?
>
> Dave,
>
> Please ask the MSC engineers to provide you with a trace and send that
> top a protocol engineer to verify what is wrong. The MSC can do this
> from software or you can get a 3rd party protocol analyzer.
>
> E10 is very configurable so they need to configure the MSC to convert
> and pass on the number you are sending. Also your NAI setting and
> number format must match their expectations - what I recommend is
> international format, but many will use National or unknown. E10 can
> override any setting you set etc.
>
> Jan
>
> ------------------------------------------------------------------------
>
> From: gustavomarsico at gmail.com <mailto:gustavomarsico at gmail.com>
> Date: Wed, 17 Nov 2010 12:16:05 -0600
> To: asterisk-ss7 at lists.digium.com <mailto:asterisk-ss7 at lists.digium.com>
> Subject: Re: [asterisk-ss7] SS7 Whitebook?
>
> 0 means "user provided, not verified"
>
> 1 means "user provided, verified and passed"
>
> 2 means "user provided, verified and failed"
>
> 3 means "network provided"
>
> In all mobile networks only 3 should be used.
>
> On Nov 17, 2010, at 11:49 AM, dave george wrote:
>
> Carrier compared my logs to other logs and he ask he to set the
> screening indicator to 3 (network provided). Currently it is set
> to 0 (restricted).
>
> Dave
>
> *From:*asterisk-ss7-bounces at lists.digium.com
> <mailto:asterisk-ss7-bounces at lists.digium.com> [mailto:asterisk-ss7-bounces at lists.digium.com
> <mailto:asterisk-ss7-bounces at lists.digium.com>] *On Behalf Of
> *peterpet
> *Sent:* Wednesday, November 17, 2010 12:23 PM
> *To:* asterisk-ss7 at lists.digium.com
> <mailto:asterisk-ss7 at lists.digium.com>
> *Subject:* Re: [asterisk-ss7] SS7 Whitebook?
>
> hi,
> example:
> put this into your conf file:
> ss7_subscriberprefix=999999
>
> in dialplan somthing like this : Dial(DAHDI/g1/999999${EXTEN})
>
> Regards,
>
>
> On 11/17/2010 07:02 PM, dave george wrote:
>
> I do send the number over to him. I can see it in the SS7
> debug. He can see the A number on his side but its not being
> passed on to his mobile customers. He asked me to set the nature
> of address indicator to 4:
>
> Any idea where I can set that.
>
> Thanks,
>
> Dave George
>
> 1 561 674 3838
>
> *From:*asterisk-ss7-bounces at lists.digium.com
> <mailto:asterisk-ss7-bounces at lists.digium.com> [mailto:asterisk-ss7-bounces at lists.digium.com]
> *On Behalf Of *Tuan Le
> *Sent:* Wednesday, November 17, 2010 11:54 AM
> *To:* asterisk-ss7 at lists.digium.com
> <mailto:asterisk-ss7 at lists.digium.com>
> *Subject:* Re: [asterisk-ss7] SS7 Whitebook?
>
> Try setting the *${CALLERID(num)}***variable right before you send
> the call over. If that does not work, run an SS7 debug trace.
> Check the calling party number field. It should be in the IAM
> message.
>
>
> On Wed, Nov 17, 2010 at 11:39 AM, dave george
> <dgeorge at teletoneinc.com <mailto:dgeorge at teletoneinc.com>> wrote:
>
> I am having a callerid problem. I receive his callerid but they
> don't receive callerid from me. The carrier on the other end is
> using Ericsson mobile switch. They ask me what type of SS7 we are
> using. He mentioned SS7 whitebook.
>
> I am using libss7 (SS7 ITU) with TE410P card.
>
> Can anyone let me know if asterisk version of SS7 is considered
> whitebook?
>
> Thanks,
>
> Dave
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com
> <http://www.api-digital.com/> --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
>
> --
> Best regards,
> Tuan Le
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com
> <http://www.api-digital.com/> --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com
> <http://www.api-digital.com/> -- asterisk-ss7 mailing list To
> UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com
> <http://www.api-digital.com/> --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
>
> --
> Best regards,
> Tuan Le
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20101117/05d4a9e2/attachment-0001.htm
|