We set the screening indicator to 3 and that seems to solve the problem.
Thanks,
Dave
From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Jan Berger
Sent: Wednesday, November 17, 2010 1:41 PM
To: asterisk-ss7 at lists.digium.com
Subject: Re: SS7 Whitebook?
Dave,
Please ask the MSC engineers to provide you with a trace and send that top a
protocol engineer to verify what is wrong. The MSC can do this from software
or you can get a 3rd party protocol analyzer.
E10 is very configurable so they need to configure the MSC to convert and
pass on the number you are sending. Also your NAI setting and number format
must match their expectations - what I recommend is international format,
but many will use National or unknown. E10 can override any setting you set
etc.
Jan
_____
From: gustavomarsico@xxxxxxxxx
Date: Wed, 17 Nov 2010 12:16:05 -0600
To: asterisk-ss7 at lists.digium.com
Subject: Re: SS7 Whitebook?
0 means "user provided, not verified"
1 means "user provided, verified and passed"
2 means "user provided, verified and failed"
3 means "network provided"
In all mobile networks only 3 should be used.
On Nov 17, 2010, at 11:49 AM, dave george wrote:
Carrier compared my logs to other logs and he ask he to set the screening
indicator to 3 (network provided). Currently it is set to 0 (restricted).
Dave
From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of peterpet
Sent: Wednesday, November 17, 2010 12:23 PM
To: asterisk-ss7 at lists.digium.com
Subject: Re: SS7 Whitebook?
hi,
example:
put this into your conf file:
ss7_subscriberprefix=999999
in dialplan somthing like this : Dial(DAHDI/g1/999999${EXTEN})
Regards,
On 11/17/2010 07:02 PM, dave george wrote:
I do send the number over to him. I can see it in the SS7 debug. He can
see the A number on his side but its not being passed on to his mobile
customers. He asked me to set the nature of address indicator to 4:
Any idea where I can set that.
Thanks,
Dave George
1 561 674 3838
From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Tuan Le
Sent: Wednesday, November 17, 2010 11:54 AM
To: asterisk-ss7 at lists.digium.com
Subject: Re: SS7 Whitebook?
Try setting the ${CALLERID(num)} variable right before you send the call
over. If that does not work, run an SS7 debug trace. Check the calling
party number field. It should be in the IAM message.
On Wed, Nov 17, 2010 at 11:39 AM, dave george <dgeorge at teletoneinc.com>
wrote:
I am having a callerid problem. I receive his callerid but they don't
receive callerid from me. The carrier on the other end is using Ericsson
mobile switch. They ask me what type of SS7 we are using. He mentioned SS7
whitebook.
I am using libss7 (SS7 ITU) with TE410P card.
Can anyone let me know if asterisk version of SS7 is considered whitebook?
Thanks,
Dave
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com
<http://www.api-digital.com/> --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
Best regards,
Tuan Le
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com
<http://www.api-digital.com/> --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
-- _____________________________________________________________________ --
Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20101117/ded7b2cd/attachment.htm
|