Florian Smeets wrote: > On 10.02.2009 17:59 Uhr, Matthew Fredrickson wrote: >> Florian Smeets wrote: >>> On 2/10/09 5:04 PM, Matthew Fredrickson wrote: >>>> Florian Smeets wrote: >>>>> These are messages from the switch: >>>>> >>>>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>>>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>>>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>>>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>>>> Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE >>>>> WITH LPC 0x708,RPC 0x3e8. DISCARDING... >>>> Your point codes are incorrect for this link. You need to correct them >>>> in you chan_dahdi.conf. (pointcode= adjpointcode=) >>> Thanks for your answer, but it is not that easy. >>> >>> I have pointcode = 1800, adjpointcode = 1000, defaultdpc = 1000 >>> >>> I know these are right, because it works with these PCs with chan_ss7, >>> that's why i think the last message is confusing... >> Can you post your chan_dahdi.conf? >> >> Also, if you could post the output of the link coming up with >> ss7linktest, that would tell a lot as well. >> > > This is what i posted previously: > > http://85.214.131.9/~flo/ss7debug.txt > http://85.214.131.9/~flo/ss7linktext.txt > > these are the interesting parts from chan_dahdi.conf > > signalling = ss7 > ss7type = itu > > linkset = 1 > > pointcode = 1800 > > adjpointcode = 1000 > > defaultdpc = 1000 > > networkindicator=national > > cicbeginswith = 1 > > channel=1-15 > > cicbeginswith = 17 > > channel = 17-31 > > sigchan = 16 Do you have any other sigchans besides 16 on this system? Can you also post a full chan_dahdi.conf? Thanks, Matthew Fredrickson
|