Florian Smeets wrote: > On 2/10/09 5:04 PM, Matthew Fredrickson wrote: >> Florian Smeets wrote: >>> These are messages from the switch: >>> >>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>> Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE >>> WITH LPC 0x708,RPC 0x3e8. DISCARDING... >> Your point codes are incorrect for this link. You need to correct them >> in you chan_dahdi.conf. (pointcode= adjpointcode=) > > Thanks for your answer, but it is not that easy. > > I have pointcode = 1800, adjpointcode = 1000, defaultdpc = 1000 > > I know these are right, because it works with these PCs with chan_ss7, > that's why i think the last message is confusing... Can you post your chan_dahdi.conf? Also, if you could post the output of the link coming up with ss7linktest, that would tell a lot as well. Matthew Fredrickson Digium, Inc.
|