On 10.02.2009 17:59 Uhr, Matthew Fredrickson wrote: > Florian Smeets wrote: >> On 2/10/09 5:04 PM, Matthew Fredrickson wrote: >>> Florian Smeets wrote: >>>> These are messages from the switch: >>>> >>>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>>> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, >>>> DPC : 0x708], Cause: SLTA_NOT_RECVD >>>> Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE >>>> WITH LPC 0x708,RPC 0x3e8. DISCARDING... >>> Your point codes are incorrect for this link. You need to correct them >>> in you chan_dahdi.conf. (pointcode= adjpointcode=) >> Thanks for your answer, but it is not that easy. >> >> I have pointcode = 1800, adjpointcode = 1000, defaultdpc = 1000 >> >> I know these are right, because it works with these PCs with chan_ss7, >> that's why i think the last message is confusing... > > Can you post your chan_dahdi.conf? > > Also, if you could post the output of the link coming up with > ss7linktest, that would tell a lot as well. > This is what i posted previously: http://85.214.131.9/~flo/ss7debug.txt http://85.214.131.9/~flo/ss7linktext.txt these are the interesting parts from chan_dahdi.conf signalling = ss7 ss7type = itu linkset = 1 pointcode = 1800 adjpointcode = 1000 defaultdpc = 1000 networkindicator=national cicbeginswith = 1 channel=1-15 cicbeginswith = 17 channel = 17-31 sigchan = 16 If you need anything else, please let me know. Cheers, Florian
|