Maybe... linkset1 connecting to SW1 linkset2 connecting to SW2 the signalling path to SW1 is via STP1 and STP2 the signalling path to SW2 is via STP1 and STP2 1st E1 channel 16 going to STP1 2nd E1 channel 16 going to STP2 I have to send sigalling messages to SW1 both of the STPs I have to send sigalling messages to SW2 both of the STPs the linkset1 must use the 1st and 2nd E1 for signalling the linkset2 must use the 1st and 2nd E1 for signalling the problem is the chan_dahdi try to set up the mtp again when I define the same channel for signalling in another linkset. Attila On Tue, 2008-09-02 at 11:56 +0300, Markus A. Wipfler wrote: > Maybe there is a communication error, what i am saying is that libss7 > is very much able to do this. I am running the very same setup in one > of my projects and it is working fine. > All you need to do is define your DPCs under the same linkset. As long > as your PC is the same this will work. Also looking at your conf it > seems that you have not setup your CICs correctly. > > -- > Markus > > > On Sep 2, 2008, at 11:35 AM, Attila Domjan wrote: > > > The telco wants this configuration. > > So the libss7 currently can't do it... > > > > On Tue, 2008-09-02 at 11:24 +0300, Markus A. Wipfler wrote: > >> You said it yourself, you need to remove the second linkset from your > >> zapata.conf. You can define the other defaultdpc before its signaling > >> channel. > >> > >> -- > >> Markus > >> > >> > >> On Sep 1, 2008, at 2:00 PM, Attila Domjan wrote: > >> > >>> Hi, > >>> Is possible to set up the following example with libss7? > >>> > >>> > >>> TELCO > >>> > >>> STP1(pc:2)----- SW1(pc:4) > >>> / | \ / > >>> / | \ / > >>> my aserisk(pc:1) | \ > >>> \ | / \ > >>> \ | / \ > >>> STP2(pc:3)----- SW2(pc:5) > >>> > >>> > >>> my configuration should be like: > >>> > >>> linkset = 1 > >>> pointcode = 1 > >>> > >>> adjpointcode = 2 > >>> defaultdpc = 4 > >>> cicbeginswith = 1 > >>> networkindicator = national_spare > >>> sigchan = 16 > >>> > >>> adjpointcode = 3 > >>> defaultdpc = 4 > >>> sigchan = 48 > >>> > >>> channel = 1-15 > >>> channel = 17-31 > >>> > >>> > >>> linkset = 2 > >>> pointcode = 1 > >>> > >>> adjpointcode = 2 > >>> defaultdpc = 5 > >>> cicbeginswith = 1 > >>> networkindicator = national_spare > >>> sigchan = 16 > >>> > >>> adjpointcode = 3 > >>> defaultdpc = 5 > >>> sigchan = 47 > >>> > >>> channel = 32-46 > >>> channel = 48-62 > >>> > >>> but the current implementation don't allow using the same signalling > >>> channel in 2 linksets. > >>> Any idea? > >>> > >>> Regards, > >>> Attila > >>> > >>> _______________________________________________ > >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- > >>> > >>> asterisk-ss7 mailing list > >>> To UNSUBSCRIBE or update options visit: > >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >> > >> > >> _______________________________________________ > >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- > >> > >> asterisk-ss7 mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080902/3692c385/attachment.pgp
|