an ss7 configuration question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
Is possible to set up the following example with libss7?


                    TELCO

                   STP1(pc:2)----- SW1(pc:4)
                  /   |      \   /
                 /    |       \ /
my aserisk(pc:1)      |        \
                 \    |       / \
                  \   |      /   \
                   STP2(pc:3)----- SW2(pc:5)


my configuration should be like:

linkset = 1
pointcode = 1

adjpointcode = 2
defaultdpc = 4
cicbeginswith = 1
networkindicator = national_spare
sigchan = 16

adjpointcode = 3
defaultdpc = 4
sigchan = 48

channel = 1-15
channel = 17-31


linkset = 2
pointcode = 1

adjpointcode = 2
defaultdpc = 5
cicbeginswith = 1
networkindicator = national_spare
sigchan = 16

adjpointcode = 3
defaultdpc = 5
sigchan = 47

channel = 32-46
channel = 48-62

but the current implementation don't allow using the same signalling
channel in 2 linksets.
Any idea?

Regards,
Attila
 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080901/e360c1ca/attachment.pgp 


[Index of Archives]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite Backpacking]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]

  Powered by Linux