You said it yourself, you need to remove the second linkset from your zapata.conf. You can define the other defaultdpc before its signaling channel. -- Markus On Sep 1, 2008, at 2:00 PM, Attila Domjan wrote: > Hi, > Is possible to set up the following example with libss7? > > > TELCO > > STP1(pc:2)----- SW1(pc:4) > / | \ / > / | \ / > my aserisk(pc:1) | \ > \ | / \ > \ | / \ > STP2(pc:3)----- SW2(pc:5) > > > my configuration should be like: > > linkset = 1 > pointcode = 1 > > adjpointcode = 2 > defaultdpc = 4 > cicbeginswith = 1 > networkindicator = national_spare > sigchan = 16 > > adjpointcode = 3 > defaultdpc = 4 > sigchan = 48 > > channel = 1-15 > channel = 17-31 > > > linkset = 2 > pointcode = 1 > > adjpointcode = 2 > defaultdpc = 5 > cicbeginswith = 1 > networkindicator = national_spare > sigchan = 16 > > adjpointcode = 3 > defaultdpc = 5 > sigchan = 47 > > channel = 32-46 > channel = 48-62 > > but the current implementation don't allow using the same signalling > channel in 2 linksets. > Any idea? > > Regards, > Attila > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|