Daniel Bichara wrote: > Hi, > > We are running libss7 with 3 E1s. First E1 has the signalling channel on > 16 and the others are connected to two different DPC (different > destinations). > > The point is: CICs of link #2 and #3 are numbered from 1 to 31. They > have the same number and function ss7_find_cic() can not find the > correct PVT (channel) when looking for CIC number 1, for example, on > GRS,GRA,BLO, etc.. > > I am working on a patch to handle OPC information (structure ss7_event / > ss7_event_ciconly) and pass this information to ss7_find_cic for such > commands. > > Any comment/suggestion is welcome. One additional question I subsequently thought of: Wouldn't this be an invalid scenario though to have in a single linkset? One of the assumptions that I made was that you have one point code associated with a linkset/set of signalling channels, not multiple codes associated with a single signalling channel. That sounds almost like an STP type configuration... I completely understand that you have this problem and are attempting to find a good way to solve it. It's just that I never presumed that such a scenario might exist for a non STP box. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.
|