Could you send the patches? Maybe someone else can try them out and tell us what they observe?
On May 10, 2014, at 2:33 PM, Killer{R} <support@xxxxxxxxxxxx> wrote:
> Hello aoetools-discuss,
>
> I tried to use AoE vblade on Dlink DNS 325 (arm box with 256 megs of
> ram) with Win2k3 srv/WinAoE 0.97g installed connected by gigabit
> ethernet with 7k jumbo frames enabled on both sides (bigger doesn't
> work somewhy on my HW). And got quite disappointing performance
> rate: while download (from vblade to WinAoE) was quite good
> (50 megs per second), upload was about 20 megs per second, that
> was much less than SMB transfer.
> I decided to try to make world better and patched vblade code, so it
> uses PACKET_RX_RING instead of plain read() and also added quite
> simple write buffering. First thing improved downalod by ~10% - to
> ~55 megs per second, second - dramatically increased upload -
> to 39 megs per second that is almost twice faster.
> Are aoetools devs planning to do somthing like this in future?
> BTW I'm not sure it can give comparable improvements on other
> systems since tested only on that little linux box
>
>
> --
> Best regards,
> Killer{R} mailto:support@xxxxxxxxxxxx
>
>
> ------------------------------------------------------------------------------
> Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
> • 3 signs your SCM is hindering your productivity
> • Requirements for releasing software faster
> • Expert tips and advice for migrating your SCM now
> http://p.sf.net/sfu/perforce
> _______________________________________________
> Aoetools-discuss mailing list
> Aoetools-discuss@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________
Aoetools-discuss mailing list
Aoetools-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
