Hello aoetools-discuss,
I tried to use AoE vblade on Dlink DNS 325 (arm box with 256 megs of
ram) with Win2k3 srv/WinAoE 0.97g installed connected by gigabit
ethernet with 7k jumbo frames enabled on both sides (bigger doesn't
work somewhy on my HW). And got quite disappointing performance
rate: while download (from vblade to WinAoE) was quite good
(50 megs per second), upload was about 20 megs per second, that
was much less than SMB transfer.
I decided to try to make world better and patched vblade code, so it
uses PACKET_RX_RING instead of plain read() and also added quite
simple write buffering. First thing improved downalod by ~10% - to
~55 megs per second, second - dramatically increased upload -
to 39 megs per second that is almost twice faster.
Are aoetools devs planning to do somthing like this in future?
BTW I'm not sure it can give comparable improvements on other
systems since tested only on that little linux box
--
Best regards,
Killer{R} mailto:support@xxxxxxxxxxxx
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________
Aoetools-discuss mailing list
Aoetools-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
