Applied "ASoC: rt1011: Read and apply r0 and temperature device property" to the asoc tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch

   ASoC: rt1011: Read and apply r0 and temperature device property

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 8de6e755069fbfaefae67d3abff2b2e3d83db986 Mon Sep 17 00:00:00 2001
From: Shuming Fan <shumingf@xxxxxxxxxxx>
Date: Wed, 16 Oct 2019 16:58:45 +0800
Subject: [PATCH] ASoC: rt1011: Read and apply r0 and temperature device
 property

Typically, the r0 (calibration data) and temperature were measured in the factory.
This information is written into the non-volatile area
where keeps data whether factory reset or OS update.
In Chromium OS case, the coreboot will read the info from VPD and create
the device property for each rt1011.

Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
Tested-By: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191016085845.11672-1-shumingf@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 sound/soc/codecs/rt1011.c | 41 ++++++++++++++++++++++++++++++++++++++-
 sound/soc/codecs/rt1011.h |  1 +
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index b927e61b32df..ad049cfddcb0 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -2328,8 +2328,12 @@ static void rt1011_calibration_work(struct work_struct *work)
 	struct rt1011_priv *rt1011 =
 		container_of(work, struct rt1011_priv, cali_work);
 	struct snd_soc_component *component = rt1011->component;
+	unsigned int r0_integer, r0_factor, format;
 
-	rt1011_calibrate(rt1011, 1);
+	if (rt1011->r0_calib)
+		rt1011_calibrate(rt1011, 0);
+	else
+		rt1011_calibrate(rt1011, 1);
 
 	/*
 	 * This flag should reset after booting.
@@ -2340,6 +2344,39 @@ static void rt1011_calibration_work(struct work_struct *work)
 
 	/* initial */
 	rt1011_reg_init(component);
+
+	/* Apply temperature and calibration data from device property */
+	if (rt1011->temperature_calib) {
+		snd_soc_component_update_bits(component,
+			RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff,
+			(rt1011->temperature_calib << 2));
+	}
+
+	if (rt1011->r0_calib) {
+		rt1011->r0_reg = rt1011->r0_calib;
+
+		format = 2147483648U; /* 2^24 * 128 */
+		r0_integer = format / rt1011->r0_reg / 128;
+		r0_factor = ((format / rt1011->r0_reg * 100) / 128)
+						- (r0_integer * 100);
+		dev_info(component->dev,	"DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
+			r0_integer, r0_factor, rt1011->r0_reg);
+
+		rt1011_r0_load(rt1011);
+	}
+}
+
+static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev)
+{
+	device_property_read_u32(dev, "realtek,temperature_calib",
+		&rt1011->temperature_calib);
+	device_property_read_u32(dev, "realtek,r0_calib",
+		&rt1011->r0_calib);
+
+	dev_dbg(dev, "%s: r0_calib: 0x%x, temperture_calib: 0x%x",
+		__func__, rt1011->r0_calib, rt1011->temperature_calib);
+
+	return 0;
 }
 
 static int rt1011_i2c_probe(struct i2c_client *i2c,
@@ -2356,6 +2393,8 @@ static int rt1011_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, rt1011);
 
+	rt1011_parse_dp(rt1011, &i2c->dev);
+
 	rt1011->regmap = devm_regmap_init_i2c(i2c, &rt1011_regmap);
 	if (IS_ERR(rt1011->regmap)) {
 		ret = PTR_ERR(rt1011->regmap);
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 3f7dea1191ad..68fadc15fa8c 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -690,6 +690,7 @@ struct rt1011_priv {
 
 	int bq_drc_set;
 	unsigned int r0_reg, cali_done;
+	unsigned int r0_calib, temperature_calib;
 	int recv_spk_mode;
 };
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux