From: Shuming Fan <shumingf@xxxxxxxxxxx>
Typically, the r0 (calibration data) and temperature were measured in the factory.
This information is written into the non-volatile area
where keeps data whether factory reset or OS update.
In Chromium OS case, the coreboot will read the info from VPD and create
the device property for each rt1011.
Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
sound/soc/codecs/rt1011.c | 41 ++++++++++++++++++++++++++++++++++++++-
sound/soc/codecs/rt1011.h | 1 +
2 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index b927e61b32df..ad049cfddcb0 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -2328,8 +2328,12 @@ static void rt1011_calibration_work(struct work_struct *work)
struct rt1011_priv *rt1011 =
container_of(work, struct rt1011_priv, cali_work);
struct snd_soc_component *component = rt1011->component;
+ unsigned int r0_integer, r0_factor, format;
- rt1011_calibrate(rt1011, 1);
+ if (rt1011->r0_calib)
+ rt1011_calibrate(rt1011, 0);
+ else
+ rt1011_calibrate(rt1011, 1);
/*
* This flag should reset after booting.
@@ -2340,6 +2344,39 @@ static void rt1011_calibration_work(struct work_struct *work)
/* initial */
rt1011_reg_init(component);
+
+ /* Apply temperature and calibration data from device property */
+ if (rt1011->temperature_calib) {
+ snd_soc_component_update_bits(component,
+ RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff,
+ (rt1011->temperature_calib << 2));
+ }
+
+ if (rt1011->r0_calib) {
+ rt1011->r0_reg = rt1011->r0_calib;
+
+ format = 2147483648U; /* 2^24 * 128 */
+ r0_integer = format / rt1011->r0_reg / 128;
+ r0_factor = ((format / rt1011->r0_reg * 100) / 128)
+ - (r0_integer * 100);
+ dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ r0_integer, r0_factor, rt1011->r0_reg);
+
+ rt1011_r0_load(rt1011);
+ }
+}
+
+static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev)
+{
+ device_property_read_u32(dev, "realtek,temperature_calib",
+ &rt1011->temperature_calib);
+ device_property_read_u32(dev, "realtek,r0_calib",
+ &rt1011->r0_calib);
+
+ dev_dbg(dev, "%s: r0_calib: 0x%x, temperture_calib: 0x%x",
+ __func__, rt1011->r0_calib, rt1011->temperature_calib);
+
+ return 0;
}
static int rt1011_i2c_probe(struct i2c_client *i2c,
@@ -2356,6 +2393,8 @@ static int rt1011_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt1011);
+ rt1011_parse_dp(rt1011, &i2c->dev);
+
rt1011->regmap = devm_regmap_init_i2c(i2c, &rt1011_regmap);
if (IS_ERR(rt1011->regmap)) {
ret = PTR_ERR(rt1011->regmap);
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 3f7dea1191ad..68fadc15fa8c 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -690,6 +690,7 @@ struct rt1011_priv {
int bq_drc_set;
unsigned int r0_reg, cali_done;
+ unsigned int r0_calib, temperature_calib;
int recv_spk_mode;
};
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
