The patch ASoC: dt-bindings: rt1011: add r0 and temperature device property has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From cf775f68a0939f0e5aad5855f63338c4b5e51c59 Mon Sep 17 00:00:00 2001 From: Shuming Fan <shumingf@xxxxxxxxxxx> Date: Wed, 16 Oct 2019 19:56:17 +0800 Subject: [PATCH] ASoC: dt-bindings: rt1011: add r0 and temperature device property Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area where keeps data whether factory reset or OS update. Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20191016115617.23213-1-shumingf@xxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/rt1011.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/rt1011.txt b/Documentation/devicetree/bindings/sound/rt1011.txt index 35a23e60d679..02d53b9aa247 100644 --- a/Documentation/devicetree/bindings/sound/rt1011.txt +++ b/Documentation/devicetree/bindings/sound/rt1011.txt @@ -20,6 +20,14 @@ Required properties: | 1 | 1 | 0x3b | ------------------------------------- +Optional properties: + +- realtek,temperature_calib + u32. The temperature was measured while doing the calibration. Units: Celsius degree + +- realtek,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + Pins on the device (for linking into audio routes) for RT1011: * SPO @@ -29,4 +37,6 @@ Example: rt1011: codec@38 { compatible = "realtek,rt1011"; reg = <0x38>; + realtek,temperature_calib = <25>; + realtek,r0_calib = <0x224050>; }; -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
