Re: [PATCH v3] ASoC: Intel: Skylake: Recover BXT FW on DSP boot timeout error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/12/19 6:24 AM, Pawel Harlozinski wrote:
When DSP boots with timeout error try to reload firmware
to keep best user expeirience.

experience


Change-Id: Ic7377da687e7441a487c443f9de1ebae5967afa2

please remove this Change-Id.

Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@xxxxxxxxx>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@xxxxxxxxxxxxxxx>
---
  sound/soc/intel/skylake/bxt-sst.c | 16 ++++++++++------
  1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 92a82e6b5fe6..fdf4c198445e 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -446,14 +446,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
/* If core 1 was turned on for booting core 0, turn it off */
  		skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
+		/* FIXME this FW recovery applies only for BXT */
  		if (ret == 0) {
-			dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
-			dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+			dev_warn(ctx->dev,
+				"DSP boot timeout: Error code=0x%x: FW status=0x%x. Reloading FW\n",
  				sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
  				sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
-			dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
-			ret = -EIO;
-			goto err;
+
+			ret = bxt_sst_init_fw(skl->dev, skl);

Can you provide more explanations on the flow, if I look at the code I only see that this will load the firmware and library, which looks like the re-doing the start of this function set_dsp_D0, it doesn't seem to retry a boot so not sure in what state the DSP lands and if all the control variables such as boot_complete are set.

+			if (ret < 0) {
+				dev_err(ctx->dev, "Reload fw failed: %d. Failed to set core0 to D0 state\n",
+				ret);
+				goto err;

is there a reason why you removed the ret = -EIO assignment?

+			}
  		}
  	}
@@ -478,7 +483,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
  	if (core_id == SKL_DSP_CORE0_ID)
  		core_mask |= SKL_DSP_CORE_MASK(1);
  	skl_dsp_disable_core(ctx, core_mask);
-
  	return ret;
  }

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux