When DSP boots with timeout error try to reload firmware
to keep best user expeirience.
Change-Id: Ic7377da687e7441a487c443f9de1ebae5967afa2
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@xxxxxxxxx>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@xxxxxxxxxxxxxxx>
---
sound/soc/intel/skylake/bxt-sst.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 92a82e6b5fe6..fdf4c198445e 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -446,14 +446,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
/* If core 1 was turned on for booting core 0, turn it off */
skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
+ /* FIXME this FW recovery applies only for BXT */
if (ret == 0) {
- dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
- dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+ dev_warn(ctx->dev,
+ "DSP boot timeout: Error code=0x%x: FW status=0x%x. Reloading FW\n",
sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
- dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
- ret = -EIO;
- goto err;
+
+ ret = bxt_sst_init_fw(skl->dev, skl);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Reload fw failed: %d. Failed to set core0 to D0 state\n",
+ ret);
+ goto err;
+ }
}
}
@@ -478,7 +483,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
if (core_id == SKL_DSP_CORE0_ID)
core_mask |= SKL_DSP_CORE_MASK(1);
skl_dsp_disable_core(ctx, core_mask);
-
return ret;
}
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
