Re: [PATCH v3 04/10] ASoC: SOF: Intel: add support for snd-hda-codec-hdmi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/12/19 7:06 AM, Kai Vehmanen wrote:
Hey,

On Tue, 10 Sep 2019, Pierre-Louis Bossart wrote:
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -84,6 +84,8 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int
[...]
+	/*
+	 * if common HDMI codec driver is not used, codec load
+	 * is skipped here and hdac_hdmi is used instead
+	 */
+	if ((mach_params && mach_params->common_hdmi_codec_drv) ||
+	    (resp & 0xFFFF0000) != IDISP_VID_INTEL) {
   		hdev->type = HDA_DEV_LEGACY;
   		hda_codec_load_module(&hda_priv->codec);

This part is might be problematic. For SoundWire stuff, I had to move all the
machine detection part out of hda_init_caps() and at the end of hda_dsp_probe.
It's not final since I am still trying to figure out what the earliest time I
can power-up the SoundWire IP is, but it would help if you don't make strong
assumptions on when mach_params is set. The fact that all this code is
currently in hda_init_caps() is not really by design, more because of
incremental code changes.

hmm. Currently the settings part of 'common_hdmi_codec_drv' is in in
init_caps, just before call to hda_codec_probe_bus() (which uses the
flag). There are also other fields set there (like
mach_params->codec_mask), so issues should apply to codec_mask passing as
well. I.e. if functionality is moved out from init_caps, the call to bus
probe should be moved as well.

Other options to pass the flag do not seem good. We don't want to add hw
specific stuff like this to snd_sof_dev or hdac_bus (latter used to pass
"codec_mask"). If this becomes an issue, maybe we just need an explicit
parameter to hda_codec_probe_bus(), and/or move the module parameter
directly to intel/hda-codec.c. Both are a bit ugly, but at least contained
in the "sof/intel/" subfolder.

never mind, with the SoundWire plumbing rework we can do all the machine driver checks in hda_init_caps. I split the ACPI scan, driver probe and startup in 3 steps so we have more freedom. Before this rework I was constrained to detect the ACPI stuff only when the hardware was powered, which was after init_caps.
In short don't worry about me/SoundWire.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux