> -----Original Message----- > From: Takashi Iwai <tiwai@xxxxxxx> > Sent: Tuesday, April 16, 2019 4:22 PM > To: Jaroslav Kysela <perex@xxxxxxxx> > Cc: Kailang <kailang@xxxxxxxxxxx>; hwang4 <hui.wang@xxxxxxxxxxxxx>; > (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx> > Subject: Re: Dell AIO speaker pop noise > > On Tue, 16 Apr 2019 10:01:31 +0200, > Jaroslav Kysela wrote: > > > > Dne 16. 04. 19 v 9:30 Kailang napsal(a): > > > Hi Takashi, > > > > > > Issue 1: The noise keeps occurring via speaker when Headset is plugged in. > > > Issue 2: The humming noise is occuring when switching to sound of > settings. > > > The noise will be stopped when switching to other options of settings. > > > Issue 3: The popping noise occurred for one second when plugged in and > removed the headset. > > > > > > This patch will solve this three issues. > > > > Hi, > > > > could you explain, why the power-save function causes this > > behaviour? Can we do something else than turning off the power-save > > codec settings to avoid such noises? I have this question because it's really > easy to disable something, but I feel that the culprit of the noises might be just > the wrong codec settings. I guess that you have probably full documentation > for the codec and probably for the hardware, so it might be nice to find the > real culprit. > > Note that power_save_node=0 doesn't mean that the whole power saving is > disabled. It disables the fine-grained power saving, i.e. powering down the > unused widget nodes. > > If so, I wonder whether this might be about the default pin-shutup behavior. I > improved the click noise problem on my Dell desktop by disabling the pin > shutup. See commit c0ca5eced222. > Kailang, Hui, did you try to add the chain to ALC269_FIXUP_NO_SHUTUP? > This noise was not happen on poweroff. AIO use external AMP. So, it will be need to have a reference voltage via codec. So, Pin-ctls was not be 0. I apply option spec->gen.suppress_auto_mute = 1 to avoid that. Internal SPK PIN also don't enter to D3. But I find it just only happen on ALC274 family codecs. ALC274 pin enter to D3. Pin-ctls also be 0. So, power_save_node=0 will let PIN to D0. power_save = 0 it also could solve issue. > > thanks, > > Takashi > > ------Please consider the environment before printing this e-mail. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
